REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)

Black screen after tos upgrade

Problems with your machine in general.
User avatar
sporniket
Site sponsor
Site sponsor
Posts: 1164
Joined: 26 Sep 2020 21:12
Location: France

Re: Black screen after tos upgrade

Post by sporniket »

Groppo91 wrote: 30 Mar 2022 14:39 Based on the schematics provided sporniket I am finding the Address pins wrong on my board:

Pin 2 says it should be going to A16 on the CPU (pin 47) but mine seems to be going to pin 48 which is A17.
I then tested pin 3 on ROM that should be going to A15 on the CPU (Pin 46) but mine seems too be going to pin 47 which is A16.
If we are talking about p4 of my schematics ("U102 U103 - EPROMS"), the pin 2 of the eproms is named "A16", and is wired to "A16_SELECT" that goes to W104 and then connected either to GND or A17 of the address bus. So in fact all is normal on your board :)
Top
Groppo91
Posts: 62
Joined: 16 Mar 2022 12:32

Re: Black screen after tos upgrade

Post by Groppo91 »

sporniket wrote: 30 Mar 2022 14:47
Groppo91 wrote: 30 Mar 2022 14:39 Based on the schematics provided sporniket I am finding the Address pins wrong on my board:

Pin 2 says it should be going to A16 on the CPU (pin 47) but mine seems to be going to pin 48 which is A17.
I then tested pin 3 on ROM that should be going to A15 on the CPU (Pin 46) but mine seems too be going to pin 47 which is A16.
If we are talking about p4 of my schematics ("U102 U103 - EPROMS"), the pin 2 of the eproms is named "A16", and is wired to "A16_SELECT" that goes to W104 and then connected either to GND or A17 of the address bus. So in fact all is normal on your board :)
Ah many thanks for the clarification. I am now puzzled to what is causing my issues as everything is testing fine. Has anyone got any ideas of what I could try next?
Top
User avatar
stephen_usher
Site sponsor
Site sponsor
Posts: 7406
Joined: 13 Nov 2017 19:19
Location: Oxford, UK.

Re: Black screen after tos upgrade

Post by stephen_usher »

You could always just swap the new ROMs over and see what happens. Wouldn't hurt anything... Just in case they were marked up incorrectly. :-)
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
Top
User avatar
rubber_jonnie
Site Admin
Site Admin
Posts: 14932
Joined: 17 Aug 2017 19:40
Location: Essex

Re: Black screen after tos upgrade

Post by rubber_jonnie »

stephen_usher wrote: 30 Mar 2022 15:15 You could always just swap the new ROMs over and see what happens. Wouldn't hurt anything... Just in case they were marked up incorrectly. :-)
+1 for this.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
Top
Groppo91
Posts: 62
Joined: 16 Mar 2022 12:32

Re: Black screen after tos upgrade

Post by Groppo91 »

stephen_usher wrote: 30 Mar 2022 15:15 You could always just swap the new ROMs over and see what happens. Wouldn't hurt anything... Just in case they were marked up incorrectly. :-)
Just tried this no difference, still black screen
Top

Return to “HARDWARE ISSUES”

Who is online

Users browsing this forum: ClaudeBot and 4 guests