Weird. I can start diagrom and all mem test ok (on fast test and 5mb slow reported ok before skipping it), but can't start normal kickstart 3.1terriblefire wrote: 28 Jan 2020 21:26Yeah you really need a basic temperature controlled iron and always use the "proper" amount of fluxarkadiusz.makarenko wrote: 28 Jan 2020 21:07 My TF536 is stable under Diagrom.
I am still troubleshooting build.
Forgot that 4 layer board are pain to solder correctly. I really need to invest in better soldering station.
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Limited TF536 Run - Sort of Sales (All gone)
Moderators: terriblefire, Terriblefire Moderator
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1360
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: Limited TF536 Run - Sort of Sales (All gone)
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
Slow ram?arkadiusz.makarenko wrote: 28 Jan 2020 21:36Weird. I can start diagrom and all mem test ok (on fast test and 5mb slow reported ok before skipping it), but can't start normal kickstart 3.1terriblefire wrote: 28 Jan 2020 21:26
Yeah you really need a basic temperature controlled iron and always use the "proper" amount of flux
Can you edit memory manually at 0x40000000?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1360
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: Limited TF536 Run - Sort of Sales (All gone)
Sorry. It was slow test option on manual mem test.terriblefire wrote: 28 Jan 2020 21:50Slow ram?arkadiusz.makarenko wrote: 28 Jan 2020 21:36
Weird. I can start diagrom and all mem test ok (on fast test and 5mb slow reported ok before skipping it), but can't start normal kickstart 3.1
Can you edit memory manually at 0x40000000?
It takes ages to test 64mb.
It must be dry solder somwhere.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
kludge
- Posts: 400
- Joined: 08 Nov 2018 14:05
- Location: Sweden
Re: Limited TF536 Run - Sort of Sales (All gone)
I’ve had that with TF534. Diagrom doesn’t test the RAM 100%, and the Kickstart power on routine does some other tests. For me it was a bridge or floating pin or something like that.
Try putting KS 1.3 on there just to see if it boots. 1.3 doesn’t test the memory as thoroughly as the later versions do.
I think Stephen made a special firmware build for me that didn’t autoconfig the fast ram, so that I could boot on a floppy and then add the RAM with addmem and run AmigaTestKit to figure out where the fault was.
Try putting KS 1.3 on there just to see if it boots. 1.3 doesn’t test the memory as thoroughly as the later versions do.
I think Stephen made a special firmware build for me that didn’t autoconfig the fast ram, so that I could boot on a floppy and then add the RAM with addmem and run AmigaTestKit to figure out where the fault was.
arkadiusz.makarenko wrote: 28 Jan 2020 21:36Weird. I can start diagrom and all mem test ok (on fast test and 5mb slow reported ok before skipping it), but can't start normal kickstart 3.1terriblefire wrote: 28 Jan 2020 21:26
Yeah you really need a basic temperature controlled iron and always use the "proper" amount of flux
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.
My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1360
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: Limited TF536 Run - Sort of Sales (All gone)
Got my TF536 booting to workbench now.
Cpld and CPU is not getting hot.
Cpld and CPU is not getting hot.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
What was up?arkadiusz.makarenko wrote: 29 Jan 2020 10:21 Got my TF536 booting to workbench now.
Cpld and CPU is not getting hot.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1360
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: Limited TF536 Run - Sort of Sales (All gone)
terriblefire wrote: 29 Jan 2020 12:45What was up?arkadiusz.makarenko wrote: 29 Jan 2020 10:21 Got my TF536 booting to workbench now.
Cpld and CPU is not getting hot.
It had to be soldering on cpld.
It seems that I still have some issues. Looks like my hdd image, as everything is ok from floppy.
EDIT: yes partition is corrupted. Need to set it up again.
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
The CPLDs are v difficult without magnification
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Justme14
- Posts: 39
- Joined: 18 Dec 2018 21:28
- Location: Netherlands
Re: Limited TF536 Run - Sort of Sales (All gone)
Hi ,
I finally received the 2 missing IC and soldered them,TF536 is now finished.
Did a run whith Frontier for 2 hours , no crash
IDE preformance seems slow get only just 1 mb , but with fastrom option , I get even more then 4 MB and Workbench feels rather snapy then.
Some Sysinfo Pics
I finally received the 2 missing IC and soldered them,TF536 is now finished.
Did a run whith Frontier for 2 hours , no crash
IDE preformance seems slow get only just 1 mb , but with fastrom option , I get even more then 4 MB and Workbench feels rather snapy then.
Some Sysinfo Pics
You do not have the required permissions to view the files attached to this post.
-
terriblefire
- Admin sponsor
- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Limited TF536 Run - Sort of Sales (All gone)
Looks like a winner.
any major changes requested?
any major changes requested?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 5 guests