My new internal graphics frame for NOVA.

[Steve]

By removing the normal VME cage it is possible to quite nicely fit the entire Nova and graphics card inside the TT. I used some aluminium and strong glue (araldite) if anyone else attempts this please remember to file down all your sharp solder points on the PCB and insulate.

PXL_20201108_165838851.jpg

PXL_20201108_165849437.jpg

PXL_20201108_165854256.jpg

PXL_20201108_165913412.jpg

PXL_20201108_165959266.jpg

[PaulJ]

It would be nice to have a SMT nova card with the components on the top only. :coffee:

[Icky]

Nice build @Steve. Still way too much board for my liking though. It would still do my OCD in knowing there is all that cable in there :)

[Steve]

It looks quite neat when installed to be honest...

PXL_20201108_180844099.jpg

PXL_20201108_182202628.jpg

[Dbug]

Very nice, looks much cleaner than the way I did it.
Guess I'll revisit my setup.

Thanks for sharing!

[mrbombermillzy]

@Steve That's a great job.

I would literally buy this from you. :)

I don't have time to build that but would really love one (to save all my leads/card hanging perilously out the back of the machine).

[Rustynutt]

Very cool Steve:)

[WDB]

Nice job, I need to do something like this.