REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)

TF1230 Beta Interest (Open Source)

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

User avatar
8 Bit Dreams
Moderator Team
Moderator Team
Posts: 785
Joined: 09 Nov 2018 07:12
Location: Germany

Re: TF1230 Beta Interest (Open Source)

Post by 8 Bit Dreams »

All right, have some Schmitt buffers left from previous projects, will try this out, just need to figure out where can i cut that track...🤔
Retro computer hardware & repair in Germany
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: 28 Aug 2017 22:56
Location: Glasgow, UK

Re: TF1230 Beta Interest (Open Source)

Post by terriblefire »

Any firmware feedback? I also increased the refresh frequency on this build to see if it helps some of the more sulky rams.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
supaduper
Site sponsor
Site sponsor
Posts: 664
Joined: 08 Nov 2018 12:05

Re: TF1230 Beta Interest (Open Source)

Post by supaduper »

I only have the Micron MT48LC16M16A2 RAM, but flashed it and it is working fine on the 1d4 and 2B :)
markus0321
Posts: 146
Joined: 19 Dec 2020 11:42
Location: Zielona Gora

Re: TF1230 Beta Interest (Open Source)

Post by markus0321 »

For me it works fine on MT48LC16M16A2-6A but as if the card was slightly slower. Unfortunately, I do not have other types of memory at home yet to test more.
User avatar
kulamario
Posts: 238
Joined: 29 Nov 2019 19:20
Location: Greystones

Re: TF1230 Beta Interest (Open Source)

Post by kulamario »

I no have memory for 128mb so I not check this
alenppc
Moderator Team
Moderator Team
Posts: 934
Joined: 08 Nov 2018 12:59

Re: TF1230 Beta Interest (Open Source)

Post by alenppc »

terriblefire wrote: 02 Oct 2021 11:11 Any firmware feedback? I also increased the refresh frequency on this build to see if it helps some of the more sulky rams.
No difference for me - same as before. But I don’t have any of the non-working motherboards.
User avatar
kulamario
Posts: 238
Joined: 29 Nov 2019 19:20
Location: Greystones

Re: TF1230 Beta Interest (Open Source)

Post by kulamario »

I done update but have 64mb Fast Ram
All working good
User avatar
GadgetUK164
Posts: 445
Joined: 04 Jan 2019 14:26

Re: TF1230 Beta Interest (Open Source)

Post by GadgetUK164 »

Working fine for me! If I wanted to swap 64MB chips for 128MB chips - what's best to go with?
My YouTube Channel - www.youtube.com/GadgetUK164
User avatar
supaduper
Site sponsor
Site sponsor
Posts: 664
Joined: 08 Nov 2018 12:05

Re: TF1230 Beta Interest (Open Source)

Post by supaduper »

GadgetUK164 wrote: 03 Oct 2021 17:14 Working fine for me! If I wanted to swap 64MB chips for 128MB chips - what's best to go with?
I use these bud

https://www.digikey.co.uk/en/products/d ... CN/6589201
culexus
Posts: 11
Joined: 01 Apr 2021 22:13

Re: TF1230 Beta Interest (Open Source)

Post by culexus »

GadgetUK164 wrote: 03 Oct 2021 17:14 Working fine for me! If I wanted to swap 64MB chips for 128MB chips - what's best to go with?
Im using the IS42S16320F-6TL and will also test out the AS4C32M16SB-7TCN since I have them in stock.
But ISSI ram working fine for me.

Return to “TF330”

Who is online

Users browsing this forum: ClaudeBot and 8 guests