REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
TF1230 Beta Interest (Open Source)
Moderators: terriblefire, Terriblefire Moderator
-
8 Bit Dreams
- Moderator Team

- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: TF1230 Beta Interest (Open Source)
All right, have some Schmitt buffers left from previous projects, will try this out, just need to figure out where can i cut that track...🤔
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor

- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF1230 Beta Interest (Open Source)
Any firmware feedback? I also increased the refresh frequency on this build to see if it helps some of the more sulky rams.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
supaduper
- Site sponsor

- Posts: 664
- Joined: 08 Nov 2018 12:05
Re: TF1230 Beta Interest (Open Source)
I only have the Micron MT48LC16M16A2 RAM, but flashed it and it is working fine on the 1d4 and 2B :)
-
markus0321
- Posts: 146
- Joined: 19 Dec 2020 11:42
- Location: Zielona Gora
Re: TF1230 Beta Interest (Open Source)
For me it works fine on MT48LC16M16A2-6A but as if the card was slightly slower. Unfortunately, I do not have other types of memory at home yet to test more.
-
kulamario
- Posts: 238
- Joined: 29 Nov 2019 19:20
- Location: Greystones
Re: TF1230 Beta Interest (Open Source)
I no have memory for 128mb so I not check this
-
alenppc
- Moderator Team

- Posts: 934
- Joined: 08 Nov 2018 12:59
Re: TF1230 Beta Interest (Open Source)
No difference for me - same as before. But I don’t have any of the non-working motherboards.terriblefire wrote: 02 Oct 2021 11:11 Any firmware feedback? I also increased the refresh frequency on this build to see if it helps some of the more sulky rams.
-
kulamario
- Posts: 238
- Joined: 29 Nov 2019 19:20
- Location: Greystones
Re: TF1230 Beta Interest (Open Source)
I done update but have 64mb Fast Ram
All working good
All working good
-
GadgetUK164
- Posts: 445
- Joined: 04 Jan 2019 14:26
Re: TF1230 Beta Interest (Open Source)
Working fine for me! If I wanted to swap 64MB chips for 128MB chips - what's best to go with?
My YouTube Channel - www.youtube.com/GadgetUK164
-
supaduper
- Site sponsor

- Posts: 664
- Joined: 08 Nov 2018 12:05
Re: TF1230 Beta Interest (Open Source)
I use these budGadgetUK164 wrote: 03 Oct 2021 17:14 Working fine for me! If I wanted to swap 64MB chips for 128MB chips - what's best to go with?
https://www.digikey.co.uk/en/products/d ... CN/6589201
-
culexus
- Posts: 11
- Joined: 01 Apr 2021 22:13
Re: TF1230 Beta Interest (Open Source)
Im using the IS42S16320F-6TL and will also test out the AS4C32M16SB-7TCN since I have them in stock.GadgetUK164 wrote: 03 Oct 2021 17:14 Working fine for me! If I wanted to swap 64MB chips for 128MB chips - what's best to go with?
But ISSI ram working fine for me.
Who is online
Users browsing this forum: ClaudeBot, facebookexternalhit and 1 guest