Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

What is wrong with my TF536

68030 + SDRAM + IDE

Moderators: terriblefire, Terriblefire Moderator

Post Reply
User avatar
kulamario
Posts: 238
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

What is wrong with my TF536

Post by kulamario »

Welcome
I done already few TF536 but never have similar problems
Amiga sometimes boot sometimes not so I put this test firmware and this what I get in result

Anyone can tell me where looking problem please

20200730_165205.jpg
20200730_165205.jpg (363.77 KiB) Viewed 3116 times
20200730_165132.jpg
20200730_165132.jpg (317.2 KiB) Viewed 3116 times
20200730_164902.jpg
20200730_164902.jpg (337.62 KiB) Viewed 3116 times
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: What is wrong with my TF536

Post by terriblefire »

That one is very weird. Unless there are two issues.

Possible that the issue is data bus connection issue to the CPLD.
BUSEN line shorted low all the time might also do it.

But i cant explain why you arent getting an interrupt in the testint2... bad cpld?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
kulamario
Posts: 238
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: What is wrong with my TF536

Post by kulamario »

I just suspect cpld
but before taking it off I preferred to ask
User avatar
kulamario
Posts: 238
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: What is wrong with my TF536

Post by kulamario »

i soldered new one but have same problem
so must be something different
User avatar
kulamario
Posts: 238
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: What is wrong with my TF536

Post by kulamario »

I messed up a bit with this test
It turned out that I am not loading this adf
after changing the adf to the appropriate one, everything is on PASS
but which does not change the fact that the disk did not work as it should
what I found out, this amiga on testing firmware works perfect
a very strange thing
User avatar
kulamario
Posts: 238
Joined: Fri Nov 29, 2019 7:20 pm
Location: Greystones

Re: What is wrong with my TF536

Post by kulamario »

problem sort card working perfect on normal firmware
problem was with memory
I soldered memory one more time and card start working on normal firmware
Post Reply

Return to “TF536”