Welcome
I done already few TF536 but never have similar problems
Amiga sometimes boot sometimes not so I put this test firmware and this what I get in result
Anyone can tell me where looking problem please
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
What is wrong with my TF536
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor

- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: What is wrong with my TF536
That one is very weird. Unless there are two issues.
Possible that the issue is data bus connection issue to the CPLD.
BUSEN line shorted low all the time might also do it.
But i cant explain why you arent getting an interrupt in the testint2... bad cpld?
Possible that the issue is data bus connection issue to the CPLD.
BUSEN line shorted low all the time might also do it.
But i cant explain why you arent getting an interrupt in the testint2... bad cpld?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: What is wrong with my TF536
I just suspect cpld
but before taking it off I preferred to ask
but before taking it off I preferred to ask
Re: What is wrong with my TF536
i soldered new one but have same problem
so must be something different
so must be something different
Re: What is wrong with my TF536
I messed up a bit with this test
It turned out that I am not loading this adf
after changing the adf to the appropriate one, everything is on PASS
but which does not change the fact that the disk did not work as it should
what I found out, this amiga on testing firmware works perfect
a very strange thing
It turned out that I am not loading this adf
after changing the adf to the appropriate one, everything is on PASS
but which does not change the fact that the disk did not work as it should
what I found out, this amiga on testing firmware works perfect
a very strange thing
Re: What is wrong with my TF536
problem sort card working perfect on normal firmware
problem was with memory
I soldered memory one more time and card start working on normal firmware
problem was with memory
I soldered memory one more time and card start working on normal firmware