Found this on my bench when I got back from Arizona last night...
Don’t yet have the parts to build it
TF360 Rev 1 Arrives
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
TF360 Rev 1 Arrives
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PhilC
- Moderator
- Posts: 7440
- Joined: 23 Mar 2018 20:22
Re: TF360 Rev 1 Arrives
Looks nice, get cracking then :lol:
If it ain't broke, test it to Destruction.
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: TF360 Rev 1 Arrives
Excellent, what was the final list of changes from the Revision0?
(With the exception of the obvious 'Notport' addition).
(With the exception of the obvious 'Notport' addition).
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Just the PLL and NotPort.go0se wrote: 10 Oct 2019 13:17 Excellent, what was the final list of changes from the Revision0?
(With the exception of the obvious 'Notport' addition).
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Two observations about the board so far.
first its much more solid in the edge connector than the 328 or 330 (or 360 r0)
Second elecrow STILL have not bevelled the damn edge connector.
first its much more solid in the edge connector than the 328 or 330 (or 360 r0)
Second elecrow STILL have not bevelled the damn edge connector.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
go0se
- Posts: 411
- Joined: 25 Nov 2018 19:55
Re: TF360 Rev 1 Arrives
It looks bevelled from the glint to the left of the centre space in the photo? must be a trick of the light!terriblefire wrote: 11 Oct 2019 08:11 Second elecrow STILL have not bevelled the damn edge connector.
The green 330 boards had a nice bevel, I assume these 360s were made by a different board house?
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
parts are ordered. Need some kind of clock port hardware at some point. Guess that can wait.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: TF360 Rev 1 Arrives
Just don't buy RapidRoad, you'll regret that
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5686
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
I think all clockport hardware is rubbish. Its a rubbish interface.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
supaduper
- Site sponsor
- Posts: 664
- Joined: 08 Nov 2018 12:05
Re: TF360 Rev 1 Arrives
I do agree, I think it`s only good for the RTC :) but it`s only my opinion so don`t shoot me guys :Dterriblefire wrote: 11 Oct 2019 14:05 I think all clockport hardware is rubbish. Its a rubbish interface.
Who is online
Users browsing this forum: ClaudeBot, gpt [bot] and 3 guests