- B0C23866-DCD9-42F5-A5DC-DFA6F6EEB99A.jpeg (391.58 KiB) Viewed 7185 times
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TF360 Rev 1 Arrives
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
TF360 Rev 1 Arrives
Found this on my bench when I got back from Arizona last night...
Don’t yet have the parts to build it
Don’t yet have the parts to build it
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Rev 1 Arrives
Excellent, what was the final list of changes from the Revision0?
(With the exception of the obvious 'Notport' addition).
(With the exception of the obvious 'Notport' addition).
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Just the PLL and NotPort.go0se wrote: Thu Oct 10, 2019 1:17 pm Excellent, what was the final list of changes from the Revision0?
(With the exception of the obvious 'Notport' addition).
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
Two observations about the board so far.
first its much more solid in the edge connector than the 328 or 330 (or 360 r0)
Second elecrow STILL have not bevelled the damn edge connector.
first its much more solid in the edge connector than the 328 or 330 (or 360 r0)
Second elecrow STILL have not bevelled the damn edge connector.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Rev 1 Arrives
It looks bevelled from the glint to the left of the centre space in the photo? must be a trick of the light!terriblefire wrote: Fri Oct 11, 2019 8:11 am Second elecrow STILL have not bevelled the damn edge connector.
The green 330 boards had a nice bevel, I assume these 360s were made by a different board house?
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
parts are ordered. Need some kind of clock port hardware at some point. Guess that can wait.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team
- Posts: 785
- Joined: Fri Nov 09, 2018 7:12 am
- Location: Germany
Re: TF360 Rev 1 Arrives
Just don't buy RapidRoad, you'll regret that
Retro computer hardware & repair in Germany
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF360 Rev 1 Arrives
I think all clockport hardware is rubbish. Its a rubbish interface.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF360 Rev 1 Arrives
I do agree, I think it`s only good for the RTCterriblefire wrote: Fri Oct 11, 2019 2:05 pm I think all clockport hardware is rubbish. Its a rubbish interface.
but it`s only my opinion so don`t shoot me guys 