Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

Aros on TerribleFire

News & updates for the upcoming 68060 accelerator

Moderators: terriblefire, Terriblefire Moderator

terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Aros on TerribleFire

Post by terriblefire »

Does anyone have any experience with Aros 68K. I've never managed to get it to work even on the later Tf330/tf536/tf360 series boards.

Seems to me the TF360 is made for AROS.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Aros on TerribleFire

Post by terriblefire »

Does anyone know how to write a HDF image to CF card ?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
supaduper
Site sponsor
Site sponsor
Posts: 664
Joined: Thu Nov 08, 2018 12:05 pm

Re: Aros on TerribleFire

Post by supaduper »

Winimage will write HDF bud, obviously the image must be the same size or smaller than your CF
go0se
Posts: 411
Joined: Sun Nov 25, 2018 7:55 pm

Re: Aros on TerribleFire

Post by go0se »

Don't forget to run Winimage as Administrator, otherwise you'll be scratching your head :)
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Aros on TerribleFire

Post by terriblefire »

supaduper wrote: Sat Sep 14, 2019 7:28 pm Winimage will write HDF bud, obviously the image must be the same size or smaller than your CF
i havent found a way to make it write HDF.. only seems to like VHD
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
go0se
Posts: 411
Joined: Sun Nov 25, 2018 7:55 pm

Re: Aros on TerribleFire

Post by go0se »

terriblefire wrote: Sat Sep 14, 2019 9:01 pm
supaduper wrote: Sat Sep 14, 2019 7:28 pm Winimage will write HDF bud, obviously the image must be the same size or smaller than your CF
i havent found a way to make it write HDF.. only seems to like VHD
Is it failing to write or just not picking the file up?

Version 9.0 :

Run as Admin.
"Disk" menu.
Restore virtual Hard Disk image on physical drive.
Choose device from list.
Change file extensions to *.*
Choose and open .hdf
Yes to begin writing straight away.

*Edit* No 'happy' message when writing completes, just returns to main window.
PaulJ_2.0
Posts: 571
Joined: Sat May 11, 2019 11:32 pm

Re: Aros on TerribleFire

Post by PaulJ_2.0 »

terriblefire wrote: Sat Sep 14, 2019 7:23 pm Does anyone know how to write a HDF image to CF card ?
win32diskimager works
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Aros on TerribleFire

Post by terriblefire »

I'll give them a go and report back
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
User avatar
supaduper
Site sponsor
Site sponsor
Posts: 664
Joined: Thu Nov 08, 2018 12:05 pm

Re: Aros on TerribleFire

Post by supaduper »

I will just add If you are creating the VHD on WinUAE , I found that when I tried setting up a system VHD and then writing it to Cf it never really worked for me, that`s why I always set up my systems on a real CF first using WinUAE and then imaging it , never have probelms this way
terriblefire
Admin sponsor
Admin sponsor
Posts: 5687
Joined: Mon Aug 28, 2017 10:56 pm
Location: Glasgow, UK

Re: Aros on TerribleFire

Post by terriblefire »

supaduper wrote: Sun Sep 15, 2019 10:01 am I will just add If you are creating the VHD on WinUAE , I found that when I tried setting up a system VHD and then writing it to Cf it never really worked for me, that`s why I always set up my systems on a real CF first using WinUAE and then imaging it , never have probelms this way
The system already exists i'm trying to dump it onto a CF card..

http://eab.abime.net/showthread.php?t=98062

Basically I'm trying to see how AROS gets on a CD32 with an 80Mhz 060.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Post Reply

Return to “TF360”