exxos 534 blog - Atari

[terriblefire]

Pinmap is in the ucf files. That’s what it’s for. It’s in my sources. Just add it to the project. You need a project for ram cpld and one for bus cpld.

The chips are a

XC9572XLVQ64-10 for the bus cpld.
XC95144XLTQ100-10 for the ram cpld

I don’t use projects or the IDE. I have a Linux makefile that build multiple boards from the same sources. The IDE sucks

The ucf files you need are here

https://github.com/terriblefire/tf534/t ... s/tf534r2c

[exxos]

OK thanks. So with all the .V files, what exactly gets loaded into which chip ? I will start with the bus one first anyway..

[terriblefire]

The files required by each are listed in the makefile

https://raw.githubusercontent.com/terri ... c/Makefile

[exxos]

Think I've got it loaded in right..

The IDE has some terrible screwy redraw bugs :roll:

666.jpg

EDIT:

33.JPG

[terriblefire]

This is why I just use visual studio code and a makefile

[exxos]

#makecable

IMG_4325.JPG

[exxos]

Well got this far...

444.jpg

[terriblefire]

You compiled that for an XA9572 not an XC9572XL

B38DE00A-B2D1-4615-B8D8-6494E2DA6181.png

[exxos]

You compiled that for an XA9572 not an XC9572XL

ah, seems the 9500 is listed in 3 different options in the menu :roll:

[exxos]

33333.JPG