REMINDER - Stay logged in for at least 2 hours a week to get whitelisted.
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
Also it helps build a picture where our "good traffic" is coming from for detection scripts.
:o)
TF 534 Status Update
Moderators: terriblefire, Terriblefire Moderator
-
PhilC
- Moderator
- Posts: 7504
- Joined: 23 Mar 2018 20:22
Re: TF 534 Status Update
Sounds good to me, sign me up already :D
If it ain't broke, test it to Destruction.
-
Cyprian
- Posts: 547
- Joined: 22 Dec 2017 09:16
- Location: Warszawa, Poland
Re: TF 534 Status Update
great,terriblefire wrote: 05 Jan 2019 01:49 OK update.
I have fixed the Atari ST bus grant issue (i think).
do you have possibility check whether the BLiTTER works also ok?
ATW800/2 / V4sa / Lynx I / Mega ST 1 / 7800 / Portfolio / Lynx II / Jaguar / TT030 / Mega STe / 800 XL / 1040 STe / Falcon030 / 65 XE / 520 STm / SM124 / SC1435
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF 534 Status Update
Its not something I can test right now unfortunately.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF 534 Status Update
The Tf534 rev 2C has shipped. I suppose it’s really the rev 3.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PhilC
- Moderator
- Posts: 7504
- Joined: 23 Mar 2018 20:22
Re: TF 534 Status Update
Hi TF,
Will try flashing my two 534s tomorrow and then burning some emutos and diagrom eprom.
Do you have a suggested firmware version for use with the ST, or should I just flash it with the latest version?
Will try flashing my two 534s tomorrow and then burning some emutos and diagrom eprom.
Do you have a suggested firmware version for use with the ST, or should I just flash it with the latest version?
If it ain't broke, test it to Destruction.
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF 534 Status Update
I have an ST specific one somewhere.. I'll see if i can find it.PhilC wrote: 29 Mar 2019 20:48 Hi TF,
Will try flashing my two 534s tomorrow and then burning some emutos and diagrom eprom.
Do you have a suggested firmware version for use with the ST, or should I just flash it with the latest version?
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: ClaudeBot and 5 guests