Hi,
I have a CDTV with a new 64-pin DIP socket installed. After the change, the TF536 IDE has not worked correctly. The RAM and CPU work fine, but the IDE does not; sometimes it appears, and sometimes it doesn't.
The accelerator works perfectly with an Amiga 500, and an Architech 30T accelerator also works just fine with this specific CDTV. The 30T gets its INT6 and OVR signals via a cable.
Based on this explanation, I suspect this type of problem might be easy to diagnose. Any ideas where the problem might lie?
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
TF536 IDE woes
Moderators: terriblefire, Terriblefire Moderator
-
matt020
- Posts: 323
- Joined: 29 Sep 2019 09:17
- Location: West Australia
Re: TF536 IDE woes
Until someone gives a technical answer, what version of CDTV ROM have you got in there?
Who is online
Users browsing this forum: CCBot and 56 guests