You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Phoenix BLUE - H4/5 BILTTER & GLUE
-
Icky
- Site Admin

- Posts: 4347
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
5x boards ordered. SMT placement also being done by manufacturer. :)
-
Icky
- Site Admin

- Posts: 4347
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
Manufacturer has just finished building the Phoenix BLUE boards. With the Phoenix MMU boards also complete they will ship back to us for testing.
You do not have the required permissions to view the files attached to this post.
-
Icky
- Site Admin

- Posts: 4347
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
And they have arrived
You do not have the required permissions to view the files attached to this post.
-
exxos
- Site Admin

- Posts: 28211
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
:bravo: :girldance:
-
JezC
- Posts: 2772
- Joined: 28 Aug 2017 23:44
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
Cool!
Are we on for a demo at CL4 then? :D
:poke:
Are we on for a demo at CL4 then? :D
:poke:
-
Icky
- Site Admin

- Posts: 4347
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
I ran the Phoenix BLUE in BLITTER test mode on a test board I created to check that all the lines are working and with a core that @ijor provided to run the tests. Flashes all lines and then walks through each. Next step is to test the Blitter core on this board in my H5.
So we might be on for a Blitter demo at CL4 if all goes well 🤞
-
ijor
- Posts: 825
- Joined: 30 Nov 2018 20:45
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
I think I can watch that video the whole weekend :)
:dualthumbup: :dualthumbup: :dualthumbup:
http://github.com/ijor/fx68k 68000 cycle exact FPGA core
FX CAST Cycle Accurate Atari ST core
http://pasti.fxatari.com
FX CAST Cycle Accurate Atari ST core
http://pasti.fxatari.com
-
GadgetUK164
- Posts: 445
- Joined: 04 Jan 2019 14:26
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
This looks very cool!Icky wrote: 03 Sep 2025 12:31 Small update on the Phoenix BLUE. We are ready to start manufacture of the first 5 boards and we are just awaiting a few parts to come in at the PCB fab. Hoping to get these back mid September, of course that doesn't mean they will work out the box as we need to refine and develop the cores. We will keep you posted on progress.
Screenshot 2025-09-03 at 10.47.47.png
My YouTube Channel - www.youtube.com/GadgetUK164
-
Icky
- Site Admin

- Posts: 4347
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: Phoenix BLUE - H4/5 BILTTER & GLUE
Thanks @GadgetUK164.
Another update from this weekends effort. We have a set built for @ijor and myself. By a set I mean 1x Phoenix MMU plus 2x Phoenix BLUEs, the first of which is set up in BLITTER mode and the second setup in GLUE mode. This set pictured is Ijor's :)
So far we have, because I couldn't wait, put the original core that @ijor got working on the original large Sparkalaphoba board we used many moons ago and it ran. However we need to do some more testing and understanding these boards. Once GLUE and MMU boards have gone through initial testing we will look at those cores as well.
Picture of Phoenix BLUE running nestled at the back of my H5 Dev build:
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: CCBot and 0 guests