Interests in the CT60e still ?

[exxos]

Are people still interested in obtaining a CT60e ?

I always felt it was a much better install than the original. I have been thinking of trying to revive this great project for some time now. Though only worth the effort if people are still interested in it..

CT60e.JPG

[HigashiJun]

Count me in.

[JezC]

I'd be interested...but probably would need to get a suitable CPU (and maybe a second Falcon) as well.

If we could swap between a stock and boosted Falcon without lots of soldering I'd reduce that to just needing the CPU...
:lol: :roll:

[exxos]

If we could swap between a stock and boosted Falcon without lots of soldering I'd reduce that to just needing the CPU...

I don't think there is any soldering needed for the CT60e. There's a jumper to enable / disable CT60 mode, that's kinda it anyway IIRC.

[don_apple]

Does the CT60e allow other cards for the expansion bus (for example the Nova Falcon) to be stacked on top? If yes I might be interested.

According to the picture it looks like on of the pin headers is duplicated on the card, but there doesn't seem to be a duplicated pin hearer for the smaller one.

[exxos]

Does the CT60e allow other cards for the expansion bus (for example the Nova Falcon) to be stacked on top? If yes I might be interested.

According to the picture it looks like on of the pin headers is duplicated on the card, but there doesn't seem to be a duplicated pin hearer for the smaller one.

AFAIK it doesn't support expansion cards (maybe a bit of a moot point as I don't believe they are made any longer?) . While there is an expansion header, I have no idea what its for.

Maybe someone else knows ?

[don_apple]

(maybe a bit of a moot point as I don't believe they are made any longer?)

Not as moot as you might think: I actually have a Nova Falcon with a Mach32 graphics card, which I currently can't use because the DFB1X doesn't pass through the expansion header.

[exxos]

Not as moot as you might think: I actually have a Nova Falcon with a Mach32 graphics card, which I currently can't use because the DFB1X doesn't pass through the expansion header.

People have got around that problem by soldering a header on top.

[Steve]

Expansion header is for the Super Videl.

[exxos]

Expansion header is for the Super Videl.

Thanks.