Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

SidecarTridge V3 Shell

The place to discuss & share your 3D models or printable parts!
Post Reply
User avatar
Todd
Posts: 9
Joined: Sun May 13, 2018 11:34 pm
Location: Cincinnati, OH
Contact:

SidecarTridge V3 Shell

Post by Todd »

Hola guys!

Thought I would let you guys know I designed a shell for the excellent SidecarTridge V3 device.

https://www.printables.com/model/126788 ... r-atari-st
SideCart_case_2025-Apr-16_03-53-05PM-000_CustomizedView24830383044.png
SideCart_case_2025-Apr-16_03-53-05PM-000_CustomizedView24830383044.png (146.72 KiB) Viewed 3257 times
Attachments
SideCart_case_2025-Apr-16_04-39-22PM-000_CustomizedView37790137.png
SideCart_case_2025-Apr-16_04-39-22PM-000_CustomizedView37790137.png (297.2 KiB) Viewed 3257 times
SideCart_case_2025-Apr-16_04-02-58PM-000_CustomizedView37989996326.png
SideCart_case_2025-Apr-16_04-02-58PM-000_CustomizedView37989996326.png (120.03 KiB) Viewed 3257 times
SideCart_case_2025-Apr-16_04-00-50PM-000_CustomizedView34138615400.png
SideCart_case_2025-Apr-16_04-00-50PM-000_CustomizedView34138615400.png (151.45 KiB) Viewed 3257 times
SideCart_case_2025-Apr-16_03-59-33PM-000_CustomizedView15620284228.png
SideCart_case_2025-Apr-16_03-59-33PM-000_CustomizedView15620284228.png (132.31 KiB) Viewed 3257 times
Todd of Retro Frog
Steve
Moderator
Moderator
Posts: 3350
Joined: Fri Sep 15, 2017 11:49 am

Re: SidecarTridge V3 Shell

Post by Steve »

That's really nice!
cathrynmataga
Posts: 13
Joined: Sun Apr 27, 2025 5:31 pm

Re: SidecarTridge V3 Shell

Post by cathrynmataga »

I'm getting one of these 3d-printed. Hasn't arrived yet, but I'm very curious how it works out.
Atari 800 -- Incognito, Fuinet
Atari STE -- TOS 1.06, SideCartridge, ACSI2STM
C64 -- 1541 Ultimate
Apple IIGS -- Rom 1.0 Woz version, CFFA 3000, AppleSqueezer, Wimodem
Macintosh IISI -- BlueSCSI, Rominator-II
cathrynmataga
Posts: 13
Joined: Sun Apr 27, 2025 5:31 pm

Re: SidecarTridge V3 Shell

Post by cathrynmataga »

And actually the black came out nicer than I was expecting. This is a nice upgrade and makes the sidecartridge much less fragile. The button came out sticky, and I'm still tweaking a little bit with exacto blads to get it to press reliaably, but it works good enough for now.
Atari 800 -- Incognito, Fuinet
Atari STE -- TOS 1.06, SideCartridge, ACSI2STM
C64 -- 1541 Ultimate
Apple IIGS -- Rom 1.0 Woz version, CFFA 3000, AppleSqueezer, Wimodem
Macintosh IISI -- BlueSCSI, Rominator-II
Post Reply

Return to “3D MODELS”