You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

SidecarTridge V3 Shell

The place to discuss & share your 3D models or printable parts!
User avatar
Todd
Posts: 9
Joined: 13 May 2018 23:34
Location: Cincinnati, OH

SidecarTridge V3 Shell

Post by Todd »

Hola guys!

Thought I would let you guys know I designed a shell for the excellent SidecarTridge V3 device.

https://www.printables.com/model/126788 ... r-atari-st
SideCart_case_2025-Apr-16_03-53-05PM-000_CustomizedView24830383044.png
You do not have the required permissions to view the files attached to this post.
Todd of Retro Frog
Steve
Posts: 3269
Joined: 15 Sep 2017 11:49

Re: SidecarTridge V3 Shell

Post by Steve »

That's really nice!
cathrynmataga
Posts: 12
Joined: 27 Apr 2025 17:31

Re: SidecarTridge V3 Shell

Post by cathrynmataga »

I'm getting one of these 3d-printed. Hasn't arrived yet, but I'm very curious how it works out.
Atari 800 -- Incognito, Fuinet
Atari STE -- TOS 1.06, SideCartridge, ACSI2STM
C64 -- 1541 Ultimate
Apple IIGS -- Rom 1.0 Woz version, CFFA 3000, AppleSqueezer, Wimodem
Macintosh IISI -- BlueSCSI, Rominator-II
cathrynmataga
Posts: 12
Joined: 27 Apr 2025 17:31

Re: SidecarTridge V3 Shell

Post by cathrynmataga »

And actually the black came out nicer than I was expecting. This is a nice upgrade and makes the sidecartridge much less fragile. The button came out sticky, and I'm still tweaking a little bit with exacto blads to get it to press reliaably, but it works good enough for now.
Atari 800 -- Incognito, Fuinet
Atari STE -- TOS 1.06, SideCartridge, ACSI2STM
C64 -- 1541 Ultimate
Apple IIGS -- Rom 1.0 Woz version, CFFA 3000, AppleSqueezer, Wimodem
Macintosh IISI -- BlueSCSI, Rominator-II

Return to “3D MODELS”

Who is online

Users browsing this forum: CCBot and 9 guests