Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

Hello from Jakarta (and a 1040STF that finally boots)

New user? Tell us about yourself!
Post Reply
ekaputrigame
Posts: 2
Joined: Thu Oct 29, 2026 10:20 am

Hello from Jakarta (and a 1040STF that finally boots)

Post by ekaputrigame »

Hi everyone, just saying hello from Jakarta. I grew up on Atari ST machines borrowed from an uncle who insisted they were for 'serious work', and I have been quietly collecting them ever since. My current project is a 1040STF that had a dead PSU and a very flaky floppy drive; the PSU is recapped and working, the drive is next. I mostly use it for MIDI sequencing and a bit of Dungeon Master, and I am still learning my way around the diagnostic side of things, so I will probably be asking more questions than I answer for a while. Glad this place is still going after all these years. Thanks for having me.
User avatar
JezC
Posts: 2896
Joined: Mon Aug 28, 2017 11:44 pm

Re: Hello from Jakarta (and a 1040STF that finally boots)

Post by JezC »

:welcomewave:

Welcome to the forum!

Which sequencers etc. do you use?
ekaputrigame
Posts: 2
Joined: Thu Oct 29, 2026 10:20 am

Re: Hello from Jakarta (and a 1040STF that finally boots)

Post by ekaputrigame »

A small follow-up, since a couple of you asked about the recapping. I keep a rough log of the machines I poke at, mostly so I stop repeating the same wrong diagnosis twice, and the 1040STF notes are in there: my notes. It is not an Atari resource by any stretch, more of a notebook, but the PSU section may save someone a fuse or two. The floppy drive is next on the bench, and I suspect the belt rather than the heads, so expect more questions soon.
Post Reply

Return to “INTRODUCE YOURSELF”