Kodak80 H4F build

[kodak80]

Not sure how quickly this will happen, if at all... but 5x H4F PCBs arrived today. I don't have components. :roll:

:logo: :cheer: :logo: :cheer: :logo:

IMG_0972.jpg (364.36 KiB) Viewed 1703 times

[PhilC]

I see lots and lots of soldering in your future :lol:

[atari030]

I'll put the kettle on. Look forward to seeing this one kick off.

[kodak80]

Spent time building an H4F board up as I had most of the components. Still need some components to get it to a power up state.

IMG_1018.jpg (438.26 KiB) Viewed 1600 times

IMG_1015.jpg (334.23 KiB) Viewed 1600 times

IMG_1014.jpg (467.73 KiB) Viewed 1600 times

IMG_1013.jpg (455.98 KiB) Viewed 1600 times

[exxos]

:bravo:

[kodak80]

The remaining components have arrived now. Will try and get them onto the board this week.

[kodak80]

Board now built and powered on. No magic smoke :)

Screen output flickers and black screen showing... :(

If I change the video adapter (plugged in) between mono and colour output, I see the desktop green colour as a thin horizontal line when switching from colour to mono so it looks like there is something there just not showing.

Will need to check things in more detail on the weekend if I get time.

[exxos]

missing jumpers on the DAC area ?

[kodak80]

missing jumpers on the DAC area ?

Jumpers were installed before testing. Here is the photo of where they are.

IMG_1026.jpeg (749.83 KiB) Viewed 1501 times

I need to check for shorts on the smd chips.

[exxos]

That's supposed to be a 10nF cap ?

IMG_1026.jpeg (518.91 KiB) Viewed 1497 times