3D Printable base for TT / MSTe PSU

[Steve]

Hi all,

I made a 3D Printable base for TT / MSTe PSU. It's no work of art, but should do the job. you'll need to self-tap or drill holes for the screws into the stand-offs. I've saved it as STL and STEP, feel free to improve it.

I'll print it and make any adjustments if necessary.

Screenshot From 2025-04-25 10-15-11.png (43.3 KiB) Viewed 1996 times

Screenshot From 2025-04-25 10-14-32.png (39.82 KiB) Viewed 1996 times

Thingiverse link: Thingiverse

[dml]

Nice! I'm going to print one of these

[Steve]

@dml I printed it out and made some adjustments, here's v3:

I've put it on Thingiverse now: https://www.thingiverse.com/thing:7023738

Screenshot From 2025-04-29 12-03-50.png (211.36 KiB) Viewed 1870 times

[dml]

Great!

I wonder if something like this exists for mounting those tiny single CFLash adapters inside a Falcon? Or even just to replace the IDE mounting bracket generally.

I'll have a look and see later today....

[Steve]

@dml Yeah there are quite a few different types on Thingiverse:

https://www.thingiverse.com/search?q=at ... con&page=1
https://www.thingiverse.com/thing:4619897
https://www.thingiverse.com/thing:4568911

[dml]

@dml Yeah there are quite a few different types on Thingiverse:

https://www.thingiverse.com/search?q=at ... con&page=1
https://www.thingiverse.com/thing:4619897
https://www.thingiverse.com/thing:4568911

just when I thought I could pack the printer away, I see lot of things I need to print

[Steve]

Here's the latest version, v7:

TTPSU_v7.png (88.32 KiB) Viewed 1766 times

[alexh]

Any pictures of someone making and using one?

[Steve]

Here @alexh :

PXL_20250509_173739789.jpg (479.42 KiB) Viewed 1762 times

PXL_20250509_173317741.jpg (465.69 KiB) Viewed 1762 times

PXL_20250509_162235671.jpg (319.63 KiB) Viewed 1762 times

[alexh]

Looking at the PSU there doesn't appear to be any GND attached to the base? And no thermal contacts either so it wasn't a heatsink or ground so no issues being plastic rather than metal? I wonder why it wasn't plastic originally? Some EC wireless interference thing?