- UK flavour (keyboard, case)
- 14 MB RAM (a board by ATIN Electronics, it seems that cutting the metal shield was part of its installation, unfortunately...)
- TOS 4.04
- FPU 68882 (the 33 MHz flavour, although it runs on 16 MHz of course)
- 2 GB IDE DOM
- all metal shields
- all screws (incl. the bolts on the DSUB connectors)
- original Atari mouse and Atari VGA adaptor
- original box and inserts
- the PCB (and of course the case) has been thoroughly cleaned
- no modifications have been done - no recapping, no NVRAM replacement, no clock patch installation (but see below on that), no retrobrighting
- the floppy drive and mouse are a bit worn out visually, I didn't want to disassemble them (not my forte) however they work 100%
- the case and keyboard is spotless, no single trace of yellowing
- the metal shield has a chunk cut off due to the memory card installation
- the box is definitely worn out and marked with letters
Additionally, if the buyer is interested, I can provide following after-deal services:
- clock patch installation: 100 EUR
- NVRAM replacement for a battery-backed one: 100 EUR
- PCB recapping: 200 EUR
Also advertised elsewhere.