RISKYKVM for Amiga

[arkadiusz.makarenko]

I have completed first version of USB HID device to Amiga interface. It is directed mainly for people who would like to use Amiga with KVMs or remote over PiKVM etc.

Not all KVMs do work with this device but overt time hopefully we will get a list of compatible devices.

Project is open source with no warranty.

https://github.com/arkadiuszmakarenko/RISKYKVM

I have created custom bootloader for this device to allow much easier firmware updates. Bootloader requires only FAT32 formatted usb flash drive.

Known issues
No reset support for "Big Amigas" solved in v1.1

This device is using RISCV budget MPU from WCH. Ch32V203C. Biggest advantage of this chip is price. Saying this it offers quite a lot for the price.

Support
I am more than happy to answer some questions, but due to limited time don't expect extensive support.
If you expect to see certain KVM support then I need to have access to it.

371807546-acc53fcd-7055-4795-9255-ddba85fc8c38.jpg

[arkadiusz.makarenko]

I have solved the reset issue.

New firmware is available here : https://github.com/arkadiuszmakarenko/RISKYKVM/releases

It does include Watchdog as well. In case of firmware crashes.

[terriblefire]

Thanks for all of this. This is an awesome project and i have a few of these in use all the time

[arkadiusz.makarenko]

Additional reset combo has been added to the firmware - v1.2
Ctrl + LWIN + "Menu button"

[davec555]

Is it possible to buy an assembled version of this? Sounds like it's exactly what I need for my setup.

Thanks
Dave

[arkadiusz.makarenko]

Is it possible to buy an assembled version of this? Sounds like it's exactly what I need for my setup.

Thanks
Dave

I may have few left from initial batch. I should be able to send you one.