You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

H5 with IMP chipset

Information and progress towards the H5 board.
ijor
Posts: 825
Joined: 30 Nov 2018 20:45

H5 with IMP chipset

Post by ijor »

Anybody using an H5 board with an IMP chipset, or at least with an IMP MMU? I know it is not recommended, but if somebody happens to be using an IMP MMU with an H5 (or even H4) board, I would appreciate a scope dump of the main 8 MHz clock, if possible zoomed to no more than a couple of cycles. Alternatively, if you don't have a scope, a trace analyzer dump could also be useful as long as the sample rate is high enough to be able to measure the 8MHz clock duty cycle.
http://github.com/ijor/fx68k 68000 cycle exact FPGA core
FX CAST Cycle Accurate Atari ST core
http://pasti.fxatari.com

Return to “H5 Phoenix Platform Edition”

Who is online

Users browsing this forum: CCBot and 3 guests