DFB1/X Flash ROM guide video

[exxos]

[jidewe]

Hello
I received and install the DBFX1 card, only the first 2 "LEDs" lights up ....
Falcon starts on normal configuration, the 128 mo memory are not recognized, only the STRam, .... and only the Copro (@16mhz) with sysinfo, i've no copro on the mobo.

[rubber_jonnie]

Hello
I received and install the DBFX1 card, only the first 2 "LEDs" lights up ....
Falcon starts on normal configuration, the 128 mo memory are not recognized, only the STRam, .... and only the Copro (@16mhz) with sysinfo, i've no copro on the mobo.

Please have a look at the install page here: DFB1/X documentation

[jidewe]

Hello
I received and install the DBFX1 card, only the first 2 "LEDs" lights up ....
Falcon starts on normal configuration, the 128 mo memory are not recognized, only the STRam, .... and only the Copro (@16mhz) with sysinfo, i've no copro on the mobo.

Please have a look at the install page here: DFB1/X documentation

ok thanks, i've read it before, but not understand all ..... (sorry i'm frenchie), it's ok now, whit teradesktop i can see ST ram and TT ram, i thing he version of sys info is not the best for this case.

[rubber_jonnie]

Please have a look at the install page here: DFB1/X documentation

ok thanks, i've read it before, but not understand all ..... (sorry i'm frenchie), it's ok now, whit teradesktop i can see ST ram and TT ram, i thing he version of sys info is not the best for this case.

Good stuff

[jidewe]

a little photo with Freemint et XAAES, next installation of thing or jinnee

IMG_3086.jpg (317.99 KiB) Viewed 2127 times

MODERATOR NOTE - FIXED HOT LINKED IMAGE.

[exxos]

a little photo with Freemint et XAAES, next installation of thing or jinnee

Thanks for the feedback. But please note hotlinking isn't allowed

[zfrenchy]

My DFB1X is somewhere above the Atlantic, and I will received soon.

In the mean time, I am looking all over the web, video included how to flash the Bank 1 with Emutos 1.3 512K.

I just want confimation I will do the right thing before burn the EPROM.

1- JE header; jump 'disable booster'
2 - BS1 header; open jumper <----- Bank 0 is TOS 4.04, to put EMUTOS in bank 1 IS THAT CORRECT ?
3- extract Emutos 'etos512us, img'
4- power the Falcon
5- use program 'DFBFLASH.TTP' with the TOS image <----- WHERE TO FIND THIS PROGRAM ?

6- put all jumpers to normal position, choose Bank 0 or Bank 1 for booting

Voila!

[DoG]

...
5- use program 'DFBFLASH.TTP' with the TOS image <----- WHERE TO FIND THIS PROGRAM ?
...

Under DFB-tools folder on the Github.

[zfrenchy]

thank you