Hi all
I am after a TF1230 or TF1260 PCB, I'm hoping someone has one spare.
I've noticed the diy PCB's are not for sale anymore
I have a Raemixx 500+ V1 PCB or peteAU A500 RAM Board PCB to trade if anyone is interested
The Raemixx 500+ V1 is a confirmed working design, just needs a 1 short bodge wire underneath, its a nice original green PCB with gold plating.
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
Wanted or Trade: TF1230 PCB or TF1260 PCB
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: Wanted or Trade: TF1230 PCB or TF1260 PCB
The Gerbers are available on the this site i'll update and add links in a bit. But i've stopped selling DIY PCBs since the TF536. Perhaps someone with a spare from an order can help you out if you dont want to order.imi2003 wrote: Sat Oct 29, 2022 9:10 pm I am after a TF1230 or TF1260 PCB, I'm hoping someone has one spare.
I've noticed the diy PCB's are not for sale anymore
viewtopic.php?f=65&t=4742
viewtopic.php?f=70&t=4526
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: Wanted or Trade: TF1230 PCB or TF1260 PCB
@terriblefire thanks for the pointers, I'll leave this open for a few weeks before I order some PCB's.
I would rather use a spare one, that no one is using than having to order a minimum of 5, which creates so much waste.
I would rather use a spare one, that no one is using than having to order a minimum of 5, which creates so much waste.
Re: Wanted or Trade: TF1230 PCB or TF1260 PCB
Where are you located?
-
redhawk668
- Posts: 91
- Joined: Sat Jan 06, 2018 3:03 pm
- Location: Netherlands
Re: Wanted or Trade: TF1230 PCB or TF1260 PCB
I’ve built a TF1230 and have some spares left, with resistors and capacitors on the underside of the PCB. The only thing you need to solder yourself are the resistor networks, they were not in stock at JLCPCB.
My collection: 1040 STE, TOS 2.06, 4 mb, CosmosEx - 520 STFM, TOS 1.04, 4 mb, Blitter, CosmosEx - 520 STFM, TOS 1.04, 4 mb - 1040 STF, TOS 1.04, 1 mb, Gotek - Amiga 1200 with Blizzard 1220/4 - Amiga 500 + ACA500 - Amiga 500 + TF530, 1 mb chipram hack.
Atari 8 bit: 800XLF, stock - 600XL, Ultimate 1 mb, Sophia RGB - 130XE, 320 kb, Sophia RGB
Sinclair stuff: 3x Spectrum 48KB, Clones: Harlequin, JS128, Nuvo128 and Issue3B replica.
Ultimate64, a few C64 breadbins and Pi1541 for storage.
Atari 8 bit: 800XLF, stock - 600XL, Ultimate 1 mb, Sophia RGB - 130XE, 320 kb, Sophia RGB
Sinclair stuff: 3x Spectrum 48KB, Clones: Harlequin, JS128, Nuvo128 and Issue3B replica.
Ultimate64, a few C64 breadbins and Pi1541 for storage.
Re: Wanted or Trade: TF1230 PCB or TF1260 PCB
@alenppc I'm in the UK, close to Gatwick
Re: Wanted or Trade: TF1230 PCB or TF1260 PCB
Thanks all, this thread can be closed
A very generous forum member has got in contact and has got a spare TF1260 board.
A very generous forum member has got in contact and has got a spare TF1260 board.