So... i've had covid for the last 10 days and been stuck in bed.... Seems this is the result.
TF2040 is an Amiga 2000 CPU Slot card that can take either an 060 or an 040.
1. 040 or 060 @ up to 50Mhz
2. 128Mb SDRAM.
3. Optionally Buffered IDE interface.
No idea if i'll get one of these ordered up soon as there is *alot* of things in the queue ahead of it but.
No i will not port this to the A500. I'm done with the A500 .
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
TF2040 Design Complete
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
TF2040 Design Complete
You do not have the required permissions to view the files attached to this post.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
stephen_usher
- Site sponsor
- Posts: 7367
- Joined: 13 Nov 2017 19:19
- Location: Oxford, UK.
Re: TF2040 Design Complete
What about the ZX81?! I'm sure it'll work... *runs away* :hide1:
I hope you're feeling better now after the viral attack anyway.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF2040 Design Complete
And i've caved in and ordered 5.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Chrissy
- Posts: 10
- Joined: 06 Jan 2020 20:12
Re: TF2040 Design Complete
Nice, i have an LC060 somewhere and i don’t even know if it works 😂.
I will still purchase one when available.
I will still purchase one when available.
-
GadgetUK164
- Posts: 445
- Joined: 04 Jan 2019 14:26
Re: TF2040 Design Complete
Holy moly!!! =O Amazing!!!! =D =D =D How are you feeling today?
:lol:
My YouTube Channel - www.youtube.com/GadgetUK164
-
screemo
- Posts: 7
- Joined: 22 Nov 2018 11:49
Re: TF2040 Design Complete
That is excellent! - will fit like a glove on my new A2000 EATX 😃👍
-
trixster
- Posts: 115
- Joined: 22 Mar 2019 15:25
Re: TF2040 Design Complete
Blimey, superb! The 2000 deserves some 060 love
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF2040 Design Complete
The target for this card is really the 040. The reason being that the TF536 doesnt quite cut it for the A2000 without an FPU.
Since we're going with 68040 bus protocols we're pretty much limited to 50Mhz (maybe a fraction more is possible) but the bus speeds will be really poor anyways. 16bit data bus @ 7Mhz.. vs 14mhz and 32 bit on the AGA amigas..
This is card i thought i might do one day after 060 prices went crazy. To that end i've split the CPU and CPLD power rails and CBT buffered the RAM.
Unfortunately its probably not going to be cost effective as the CPLDs are currently $70 each.
Since we're going with 68040 bus protocols we're pretty much limited to 50Mhz (maybe a fraction more is possible) but the bus speeds will be really poor anyways. 16bit data bus @ 7Mhz.. vs 14mhz and 32 bit on the AGA amigas..
This is card i thought i might do one day after 060 prices went crazy. To that end i've split the CPU and CPLD power rails and CBT buffered the RAM.
Unfortunately its probably not going to be cost effective as the CPLDs are currently $70 each.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Chrissy
- Posts: 10
- Joined: 06 Jan 2020 20:12
Re: TF2040 Design Complete
I currently have the TF534 in my 2000 with the FPU, along with Liv’s GottaGoFastRam in the zorro slot.
All works great together.
I do also have an 040 cpu in an unknown state too 😂 and a few cpld’s left from the 534 and 536.
All works great together.
I do also have an 040 cpu in an unknown state too 😂 and a few cpld’s left from the 534 and 536.
Who is online
Users browsing this forum: CCBot and 24 guests