Hi,
I'm just trying to use RetroTink 5x with my ST (520 STM) but can't make it work with SCART RGB... I've tried two SCART cables (both work in RGB mode with my SCART TV) but RetroTink only displays "no signal" (in SCART RGB input mode)..
Any ideas what might be wrong?
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
RetroTink 5X and the ST
-
Steve
- Posts: 3289
- Joined: 15 Sep 2017 11:49
Re: RetroTink 5X and the ST
I would contact Retrotink support personally. Could be an issue with the SCART cable. Apparently some SCART cables can be down-right dangerous depending on how they've been configured/wired.
Who is online
Users browsing this forum: CCBot and 25 guests