You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

C301564-001 MEGA STE REV B

MEGA STE motherboards.
troed
Posts: 936
Joined: 21 Aug 2017 22:27

C301564-001 MEGA STE REV B

Post by troed »

mega_ste_revf_top.JPG
You do not have the required permissions to view the files attached to this post.
troed
Posts: 936
Joined: 21 Aug 2017 22:27

Re: C301564-001 MEGA STE REV B

Post by troed »

mega_ste_revf_bottom.JPG
You do not have the required permissions to view the files attached to this post.
User avatar
DoG
Posts: 1284
Joined: 07 Apr 2018 12:26

Re: C301564-001 MEGA STE REV B

Post by DoG »

Hmm. Where do you locate the revisions on these motherboards? I only see CA400677 in the top left corner under the PSU.
czietz
Posts: 578
Joined: 14 Jan 2018 13:02

Re: C301564-001 MEGA STE REV B

Post by czietz »

DoG wrote: 05 Feb 2019 19:00 Hmm. Where do you locate the revisions on these motherboards? I only see CA400677 in the top left corner under the PSU.
rev.JPG
You do not have the required permissions to view the files attached to this post.
User avatar
DoG
Posts: 1284
Joined: 07 Apr 2018 12:26

Re: C301564-001 MEGA STE REV B

Post by DoG »

Thanks. Sneaky...
displaced
Posts: 42
Joined: 19 May 2018 23:15
Location: UK

Re: C301564-001 MEGA STE REV B

Post by displaced »

My board has the same part and revision number, but has a couple of notable differences:

- Blitter is a separate IC, just under the right-hand VME ribbon

- ROM type headers are present and have jumpers fitted above the HI ROM

- An AJAX floppy controller is present, and the support GAL is the correct version for HD floppy support (although the drive itself is a DD Epson model. Can’t have it all I suppose!). The AJAX and GAL *might* be after-market, but the machine’s definitely still got its original FDD.

I’m still intrigued by the SPARE1 and SPARE2 sockets... Spare what, precisely?!

Oh and I just noticed - the two ICs at U8 and U9 are the same half-width as shown in the photo here, but they’re both labelled as “PRE QUAL”. And many more of my GALs have printed paper labels.

Think this machine might’ve been a real “what’ve we got left at the back of the warehouse, Barry?” job! Serial is A1 4003267
A bunch of Ataris and others:
Atari XEGS with RGB mod - STFM - Portfolio - Lynx Mk1 with McWill display - Mega STE - Falcon030 - Jaguar
Commodore VIC-20 CR with ClearVideo - CDTV (Wicher 8MB+IDE)
Acorn Electron - Archimedes A3020

Return to “MEGA STE”

Who is online

Users browsing this forum: CCBot and 3 guests