Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
Exxos PSU Installed
-
PeckPeekPoke
- Posts: 68
- Joined: Tue May 25, 2021 7:52 pm
- Location: New England
Exxos PSU Installed
Pleased to report that I've wired a blue Exxos PSU at 110v and it seems to be working quite nicely. Thanks
FOR GREAT JUSTICE. TAKE OUT EVERY ZIG
800xl+U1mb, STfm, STe, 030
800xl+U1mb, STfm, STe, 030
Re: Exxos PSU Installed
Post some images 
-
PeckPeekPoke
- Posts: 68
- Joined: Tue May 25, 2021 7:52 pm
- Location: New England
Re: Exxos PSU Installed
I de-soldered, cleaned and recycled the old AC connector, yucky power switch and motherboard connector. I would have bought a new power switch, had I not neglected to read the instructions before ordering. 
Here is a photo just prior to connecting the Exxos PSU to the Motherboard.
After verifying 12v, 5v, and Grounds, I tested the machine with Edittrack, a glorious triumph indeed. This power supply definitely runs very cool, I could barely feel any warmth at all, whereas the PSU on my STFM could probably be put to culinary use.
Here is a photo just prior to connecting the Exxos PSU to the Motherboard.- falcon_psu_install.jpg (274.49 KiB) Viewed 2403 times
After verifying 12v, 5v, and Grounds, I tested the machine with Edittrack, a glorious triumph indeed. This power supply definitely runs very cool, I could barely feel any warmth at all, whereas the PSU on my STFM could probably be put to culinary use.
- falcon030.jpg (169.5 KiB) Viewed 2403 times
FOR GREAT JUSTICE. TAKE OUT EVERY ZIG
800xl+U1mb, STfm, STe, 030
800xl+U1mb, STfm, STe, 030
