You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

Atari 130XE case / keyboard remake

The place to discuss & share your 3D models or printable parts!
User avatar
gianlucarenzi
Posts: 1
Joined: 29 Apr 2021 08:50

Atari 130XE case / keyboard remake

Post by gianlucarenzi »

Hi! @Icky and @exxos
Very good job indeed for the STFM 3D case. I would like to have a similar 3D for my Atari 130XE as I already done a custom kyeboard PCB and this can have more keys that actually the Atari XL/XE can have (F1...F4 and other).
How did you start? Using 3D scanner? Did every measurements by hand then 3D with some software?
Please help me out to find a house to this beauty:

Feel free to contact me ASAP to share some information!!

newkeyboard-Atari-130xe-white.jpeg
oldkeyboard-Atari-130xe-creamy.jpeg
old-closeup-silkscreen.jpeg
old-left-closeup.jpeg
old-closeup.jpeg
F1-F4-Keys.jpeg
old-keycaps-before-paint.jpeg
left-closeup.jpeg
old-right-closeup.jpeg
painting-rack-after.jpeg
painting-rack-before.jpeg
right-closeup.jpeg
working-mode.jpeg

Thanks!
Gianluca Renzi
RetroBitLab Tech Guy
https://github.com/gianlucarenzi
icjtqr@gmail.com
You do not have the required permissions to view the files attached to this post.
Sincerely,
Gianluca Renzi,
RetroBitLab Tech Guy
https://github.com/gianlucarenzi
email: icjtqr<AT>gmail<DOT>com
Top
User avatar
Icky
Site Admin
Site Admin
Posts: 4311
Joined: 03 Sep 2017 10:57
Location: UK

Re: Atari 130XE case / keyboard remake

Post by Icky »

Hi @gianlucarenzi

Impressive keyboard remake for the Atari XE. We have moved your post to its own thread as it would be good if you could use this thread to discuss your journey building the keyboard. In addition we can also discuss 3D parts for the keys and case here too.
Top

Return to “3D MODELS”

Who is online

Users browsing this forum: CCBot and 13 guests