You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

Mega ST4 - AdSpeed accelerator @ 16 mhz

Benchmark screenshots for various boosters & machines.
User avatar
Darklord
Site sponsor
Site sponsor
Posts: 1576
Joined: 20 Sep 2017 13:41
Location: Prestonsburg

Mega ST4 - AdSpeed accelerator @ 16 mhz

Post by Darklord »

Since I was doing benchmarks on my Pak 68/3 equipped STacy, I thought
I'd go ahead and do one on the Mega ST4 that runs DarkForce.

I know there's several 16 mhz benchmarks already posted but I didn't see
one just for the AdSpeed so I thought I'd throw it in.

It's a Mega ST4 with TOS v1.4 and an AdSpeed accelerator board running
at 16 mhz. This is in med. resolution. I do not have the fast ROM option
enabled. I've not been able to find the ROMs at the speeds specified in
the AdSpeed manual to work correctly. I would be curious how much it
would affect the results.
MST4_ADS.PNG
You do not have the required permissions to view the files attached to this post.
Welcome To DarkForce! www.darkforce.org "The Fuji Lives.!"
Atari SW/HW based BBS-Telnet:darkforce-bbs.dyndns.org 1040
Top

Return to “BENCHMARKS”

Who is online

Users browsing this forum: CCBot and 7 guests