Figured I’d start one of these as well
This weekend I received something I paid way too much for but have been wanting for nearly thirty years - an unmolested 4MB USA Falcon 030!
Of course I’ve got yet another Exxos order on the way with parts for it...
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
What I’m up to...
-
DominoTree
- Posts: 107
- Joined: 25 Sep 2020 02:47
What I’m up to...
You do not have the required permissions to view the files attached to this post.
-
DominoTree
- Posts: 107
- Joined: 25 Sep 2020 02:47
Re: What I’m up to...
In other news the final PCBs for the DIN14 adapters and external floppy boards should be here Tuesday or Wednesday - should have new DIN14 “cables” and DIN14-to-external floppy boards up for sale for around $10USD each
(Pic attached are the previous prototypes that needed a couple of tweaks) - new boards are white with a rainbow ribbon cable and built using the absolute sturdiest Micro-USB B connector available
(Pic attached are the previous prototypes that needed a couple of tweaks) - new boards are white with a rainbow ribbon cable and built using the absolute sturdiest Micro-USB B connector available
You do not have the required permissions to view the files attached to this post.
-
DominoTree
- Posts: 107
- Joined: 25 Sep 2020 02:47
Re: What I’m up to...
Oh, full plans and Gerbers for these are at https://github.com/5vsupply/Atari_FloppyDominoTree wrote: 28 Mar 2021 02:00 In other news the final PCBs for the DIN14 adapters and external floppy boards should be here Tuesday or Wednesday - should have new DIN14 “cables” and DIN14-to-external floppy boards up for sale for around $10USD each
(Pic attached are the previous prototypes that needed a couple of tweaks) - new boards are white with a rainbow ribbon cable and built using the absolute sturdiest Micro-USB B connector available
I still need to make a proper BOM but the only non-standard part are these pins https://www.digikey.com/en/products/det ... 0/10063633
-
DominoTree
- Posts: 107
- Joined: 25 Sep 2020 02:47
Re: What I’m up to...
Got the RAM and a new video adapter and so far it’s smooth sailing - still waiting on an FPU to arrive so I can run everything bundled with FreeMiNT. Also waiting on some EEPROMs to show up to load new EmuTOS builds on.
I can’t believe this is finally happening! :D
I can’t believe this is finally happening! :D
You do not have the required permissions to view the files attached to this post.
-
DominoTree
- Posts: 107
- Joined: 25 Sep 2020 02:47
Re: What I’m up to...
External floppy PCBs have arrived!
You do not have the required permissions to view the files attached to this post.
-
DominoTree
- Posts: 107
- Joined: 25 Sep 2020 02:47
Re: What I’m up to...
And there we have it
You do not have the required permissions to view the files attached to this post.
-
DaveC
- Posts: 125
- Joined: 18 Sep 2020 18:24
Re: What I’m up to...
:lol:
You do not have the required permissions to view the files attached to this post.
-
DominoTree
- Posts: 107
- Joined: 25 Sep 2020 02:47
Re: What I’m up to...
-
exxos
- Site Admin
- Posts: 28211
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: What I’m up to...
Love the name! :lol: :thumbup:
-
Icky
- Site Admin
- Posts: 4347
- Joined: 03 Sep 2017 10:57
- Location: UK
Re: What I’m up to...
Agree with @exxos cool name for your store @DominoTree
Who is online
Users browsing this forum: CCBot and 15 guests