Help identifying the upgrades on a Falcon.

General discussions or ideas about hardware.
User avatar
AndresPlazaR
Posts: 147
Joined: 03 Apr 2019 15:35
Location: Boston, MA, USA

Help identifying the upgrades on a Falcon.

Post by AndresPlazaR »

Hello!

I'm finally the owner of a Falcon, and I'm very happy. The first impression is that the machine is working, so that's nice. But when I opened it, I found 2 upgrades that I cannot identify:
PXL_20201027_015040373.jpg
First one, I think, it is a buffer patch. It has wires going to the floppy controller (pin 14) and to the motherboard.
PXL_20201027_015033878.jpg
Second one, has wires connected to both EF68B50P ICs (pins 3, 4 and 5) and other places in the motherboard. It has some oscillators, so... It is some kind of overclocking? The strange thing is that there are other cables coming from the little board, but they are cut. And, of course, there is the fact the fan was removed to put this little board.

Any clues?

Thanks,

Andres.
You do not have the required permissions to view the files attached to this post.
--
Andres Plaza R.
Bluesky: @aplaza.bsky.social
Twitter: @AndresPlazaR
User avatar
exxos
Site Admin
Site Admin
Posts: 28344
Joined: 16 Aug 2017 23:19
Location: UK

Re: Help identifying the upgrades on a Falcon.

Post by exxos »

looks like nemesis bus speeder.
User avatar
AndresPlazaR
Posts: 147
Joined: 03 Apr 2019 15:35
Location: Boston, MA, USA

Re: Help identifying the upgrades on a Falcon.

Post by AndresPlazaR »

exxos wrote: 27 Oct 2020 09:01 looks like nemesis bus speeder.
Thank you so much! Yes, searched for Nemesis and the same card showed. :-)
--
Andres Plaza R.
Bluesky: @aplaza.bsky.social
Twitter: @AndresPlazaR
Steve
Posts: 3305
Joined: 15 Sep 2017 11:49

Re: Help identifying the upgrades on a Falcon.

Post by Steve »

Hi Andres,

Well done for finding a nice Falcon! You are lucky to have the Nemesis bus accelerator, it makes the Falcon so much better to use and enables much higher resolutions in true colour if you use Videlity or Centscreen etc. Just remember you need to have the accelerator enabler in the AUTO folder for it to enable.

Check out this: http://newbeat.atari.org/main.php?page=productions
The Nemesis indicator is a very good tool.
User avatar
AndresPlazaR
Posts: 147
Joined: 03 Apr 2019 15:35
Location: Boston, MA, USA

Re: Help identifying the upgrades on a Falcon.

Post by AndresPlazaR »

Steve wrote: 27 Oct 2020 14:03 Just remember you need to have the accelerator enabler in the AUTO folder for it to enable.

Check out this: http://newbeat.atari.org/main.php?page=productions
The Nemesis indicator is a very good tool.
Thank you for those tips, Steve!
--
Andres Plaza R.
Bluesky: @aplaza.bsky.social
Twitter: @AndresPlazaR
User avatar
AndresPlazaR
Posts: 147
Joined: 03 Apr 2019 15:35
Location: Boston, MA, USA

Re: Help identifying the upgrades on a Falcon.

Post by AndresPlazaR »

Steve wrote: 27 Oct 2020 14:03 Just remember you need to have the accelerator enabler in the AUTO folder for it to enable.

The Nemesis indicator is a very good tool.
Steven, actually I have one question: the Nemesis indicator that you mention, it is different than the "accelerator enabler" you mention first? If so, do you know where I can get the accelerator enabler? The Falcon did not come with a diskette with it.

Thanks,

Andres.
--
Andres Plaza R.
Bluesky: @aplaza.bsky.social
Twitter: @AndresPlazaR
User avatar
exxos
Site Admin
Site Admin
Posts: 28344
Joined: 16 Aug 2017 23:19
Location: UK

Re: Help identifying the upgrades on a Falcon.

Post by exxos »

User avatar
AndresPlazaR
Posts: 147
Joined: 03 Apr 2019 15:35
Location: Boston, MA, USA

Re: Help identifying the upgrades on a Falcon.

Post by AndresPlazaR »

exxos wrote: 28 Oct 2020 04:13 This may help.. https://www.exxosforum.co.uk/forum/viewt ... p=115#p115
Aha! As always, thank you very much, @exxos !
--
Andres Plaza R.
Bluesky: @aplaza.bsky.social
Twitter: @AndresPlazaR

Return to “HARDWARE DISCUSSIONS”

Who is online

Users browsing this forum: ClaudeBot and 6 guests