Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)

Ultrasatan case

The place to discuss & share your 3D models or printable parts!
Post Reply
User avatar
exxos
Site Admin
Site Admin
Posts: 28703
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:
Contact exxos

Ultrasatan case

Post by exxos »

Just saw this posted...
us.jpg
us.jpg (48.16 KiB) Viewed 6855 times

https://www.thingiverse.com/thing:3838951


Download link doesn't seem to work though :shrug:
Top
User avatar
Cosmic Puppet
Posts: 1734
Joined: Fri Aug 02, 2019 1:03 am
Location: Angus!
Contact:
Contact Cosmic Puppet

Re: Ultrasatan case

Post by Cosmic Puppet »

That looks well nice!

Didn't work on this PC either.
US Atari 520 STFM (C070523-001 REV.D1) , Exxos PSU, 4MB Marpet Upgrade, Exxos 6 Chip TOS 1.04 USA, EmuTOS 1.0.1, Ultrasatan, PP Driver, Original Floppy Disk Drive, NEC Multisync EA193Mi Monitor, Star LC-10c Printer, iMP C100110-001 DMA.

https://thecosmicpuppets.bandcamp.com/releases My released music so far...
Top
Tomswork
Posts: 776
Joined: Fri Nov 22, 2019 10:05 pm

Re: Ultrasatan case

Post by Tomswork »

Yes I need a 3d printer
🖨

Tom
Top
User avatar
atari030
Posts: 366
Joined: Mon Feb 12, 2018 12:43 pm

Re: Ultrasatan case

Post by atari030 »

That is just too damn sexy.
Top
User avatar
PhilC
Moderator
Moderator
Posts: 7527
Joined: Fri Mar 23, 2018 8:22 pm

Re: Ultrasatan case

Post by PhilC »

Nice, will have to grab that later on
If it ain't broke, test it to Destruction.
Top
User avatar
bj_kock
Posts: 6
Joined: Sat Feb 10, 2018 6:14 pm
Location: Sweden

Re: Ultrasatan case

Post by bj_kock »

It look very nice indeed :D
Just need a 3D-printer (and an UltraSatan) :shock:
The "Download all" buttons didn´t work for me either, but I could download the files one by one under "Thing Files"
Download.JPG
Download.JPG (115.23 KiB) Viewed 6816 times
Top
User avatar
sandord
Posts: 764
Joined: Mon Aug 13, 2018 10:08 pm
Location: The Netherlands
Contact:
Contact sandord

Re: Ultrasatan case

Post by sandord »

Looks like they applied some post-printing treatment since the curves look so smooth. If it's PLA, it could've been done using a heater. For ABS, probably acetone.
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 28703
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:
Contact exxos

Re: Ultrasatan case

Post by exxos »

sandord wrote: Wed Sep 09, 2020 10:28 am Looks like they applied some post-printing treatment since the curves look so smooth. If it's PLA, it could've been done using a heater. For ABS, probably acetone.
Yeah I thought the same that it looks to good for a print alone.
Top
tomster
Posts: 36
Joined: Fri Apr 17, 2020 8:34 am

Re: Ultrasatan case

Post by tomster »

I've printed this case a while ago (with the 'moss green' PLA) and it's indeed a great little box. Did half an hour of post-processing with sandpaper (wet). The only negative is that the case easily cracks at the front (along the SD card slots), so be careful when processing that part.

I really like how the cheese grater turned out. I'll also do a MIST case based on this design next.
Attachments
PXL_20200909_142901265.jpg
PXL_20200909_142901265.jpg (238.18 KiB) Viewed 6768 times
Top
User avatar
exxos
Site Admin
Site Admin
Posts: 28703
Joined: Wed Aug 16, 2017 11:19 pm
Location: UK
Contact:
Contact exxos

Re: Ultrasatan case

Post by exxos »

That looks really good :thumbup:
Top
Post Reply

Return to “3D MODELS”