Enjoying my time building my 536.. Got my cpld on the board. Have read so many threads and apologize if not caught what jed I should be using. Last I saw was tf536r2_main_top_test.jed as the one to roll with. Correct? If not, what should I be using?
Thanks gents,
weav
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
so which jed??
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: so which jed??
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: so which jed??
TF.. thanks but get link not found when trying to get firmware here:
https://github.com/terriblefire/terribl ... HASE_7.zip
Let me know if me or is broken.
Thanks
https://github.com/terriblefire/terribl ... HASE_7.zip
Let me know if me or is broken.
Thanks
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: so which jed??
Just take the latest one from github.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: so which jed??
my stupidity.. shoulda saved firmware link instead of trying to goto the page. got it thanks.