You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
How to reprogram firmware TF536
Moderators: terriblefire, Terriblefire Moderator
-
matt020
- Posts: 324
- Joined: 29 Sep 2019 09:17
- Location: West Australia
How to reprogram firmware TF536
With it likely that the TF536 will need an updated firmware to work on an A2000, what hardware is required to flash a new firmware? And is the software to flash it available in Windows?
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1360
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: How to reprogram firmware TF536
Do you have Rasperry pi?matt020 wrote: 17 Jul 2020 21:45 With it likely that the TF536 will need an updated firmware to work on an A2000, what hardware is required to flash a new firmware? And is the software to flash it available in Windows?
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
terriblefire
- Admin sponsor
- Posts: 5682
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: How to reprogram firmware TF536
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 0 guests