NEW BOM

GadgetUK164 · Post by **GadgetUK164** » 01 Jul 2020 15:34

Does anyone know where the BOM is for these? I am now able to order the parts up but not sure precisely what I need to order!

go0se · Post by **go0se** » 01 Jul 2020 15:38

GadgetUK164 wrote: 01 Jul 2020 15:34 Does anyone know where the BOM is for these? I am now able to order the parts up but not sure precisely what I need to order!

https://www.exxosforum.co.uk/forum/viewt ... 728#p38246

LADmachining · Post by **LADmachining** » 01 Jul 2020 16:43

I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.

https://docs.google.com/spreadsheets/d/ ... 2098118341

Anthony

GadgetUK164 · Post by **GadgetUK164** » 01 Jul 2020 19:38

LADmachining wrote: 01 Jul 2020 16:43 I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.

https://docs.google.com/spreadsheets/d/ ... 2098118341

Anthony

Thanks =D!!!!! And goose too!

EDIT: Parts ordered - good grief that was expensive lol! I found it cheaper to order from Digikey as you can order smaller quantities. RS have large packs of everything...

richx · Post by **richx** » 04 Jul 2020 15:45

LADmachining wrote: 01 Jul 2020 16:43 I have re-formatted and combined the BoMs for TF534 and 536, and included Mouser, Digi-Key and RS stock codes.

https://docs.google.com/spreadsheets/d/ ... 2098118341

Anthony

On row 8, the Digikey/Mouser part numbers are pointing to wrong 1Mx8 size memory.

W9825G6KH-6-ND seems to be the cheapest memory on Digikey.

Post by **alenppc** » 04 Jul 2020 15:51

Wow that RAM is super cheap. Do we know if it actually works with this board?

PaulJ_2.0 · Post by **PaulJ_2.0** » 04 Jul 2020 15:58

alenppc wrote: 04 Jul 2020 15:51 Wow that RAM is super cheap. Do we know if it actually works with this board?

I have quite a few of these, I will have a go now and report back.

Edit:
Diagrom sees and tests them fine, but wont boot OS from IDE at all.
Tried running a memtest from floppy and no joy.

I have -7 not the -6 Above.

Post by **8 Bit Dreams** » 05 Jul 2020 06:46

richx wrote: 04 Jul 2020 15:45
On row 8, the Digikey/Mouser part numbers are pointing to wrong 1Mx8 size memory.

W9825G6KH-6-ND seems to be the cheapest memory on Digikey.

already tried - this ram type isn't working

Post by **terriblefire** » 05 Jul 2020 09:43

8 Bit Dreams wrote: 05 Jul 2020 06:46
richx wrote: 04 Jul 2020 15:45
On row 8, the Digikey/Mouser part numbers are pointing to wrong 1Mx8 size memory.

W9825G6KH-6-ND seems to be the cheapest memory on Digikey.
already tried - this ram type isn't working

Next time i actually build a board i'll try some of this stuff. Might be a while

Post by **PhilC** » 05 Jul 2020 10:04

I've been trying 16m x 16 chips and will try a 32m x 16 chips this week.

I presume a 1m x 8 would be wrong format?

NEW BOM

NEW BOM

Re: TF536 Bulk Order Batch 4 (exxos run)

Re: TF536 Bulk Order Batch 4 (exxos run)

Re: TF536 Bulk Order Batch 4 (exxos run)

Re: TF536 Bulk Order Batch 4 (exxos run)

Re: TF536 Bulk Order Batch 4 (exxos run)

Re: TF536 Bulk Order Batch 4 (exxos run)

Re: TF536 Bulk Order Batch 4 (exxos run)

Re: TF536 Bulk Order Batch 4 (exxos run)

Re: TF536 Bulk Order Batch 4 (exxos run)

Who is online