Does anyone know which firmware version is required to get them working together? I've found several
references to it working, but I've had no luck getting it to work?
Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TF520 with Kipper2k 8mb board
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF520 with Kipper2k 8mb board
https://github.com/terriblefire/terribl ... _alpha.zipHomer79 wrote: Thu Jun 04, 2020 8:46 pm Does anyone know which firmware version is required to get them working together? I've found several
references to it working, but I've had no luck getting it to work?
i'd expect the one in there to work.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."