You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!

Hard drive sector viewer ?

General Discussion, STOS.
User avatar
exxos
Site Admin
Site Admin
Posts: 27973
Joined: 16 Aug 2017 23:19
Location: UK

Hard drive sector viewer ?

Post by exxos »

Anyone know of any program which can view sectors in hex on the ST ? I think diamond edge could do it.. but anything lightweight which will do the job would do...
User avatar
kodak80
Posts: 519
Joined: 21 Oct 2017 01:14
Location: Brisbane, QLD, Australia

Re: Hard drive sector viewer ?

Post by kodak80 »

What about Knife ST (HiSoft)?
Raven060 | Atari Falcon 030 | Atari 1040 STE | Atari 1040 STFM | Atari 1040 STF | Kryoflux & Supercard Pro Flux boards
Creator of the Atari ST Review magazine archive: https://www.chillichai.com/atari-st-review
mikro
Posts: 811
Joined: 28 Aug 2017 23:22
Location: Kosice, Slovakia

Re: Hard drive sector viewer ?

Post by mikro »

Diskus by Uwe Seimet (now free) comes into my mind.
User avatar
frank.lukas
Posts: 805
Joined: 19 Jan 2018 11:52

Re: Hard drive sector viewer ?

Post by frank.lukas »

User avatar
ari.tao
Posts: 45
Joined: 18 Sep 2018 08:50

Re: Hard drive sector viewer ?

Post by ari.tao »

The SED_5.68 (latest version? 4.4.95) is crashing with bus error under NAES_2, but works under NAES_1, MAGX_6.21, SoloMiNT_1.15.9 ... with comfortable handling.
Support of Diskus_3.99.2 (2016) was abondended short after I baught it ...
KnifeST_1.10 (07-05-91) seems to be a little outdated.
They can do FAT12 & FAT16 only, not FAT32.
With DiamondEdge_2.57 (26.01.2017) I lack experience (the inst. scares me). Can it handle FAT32 ?

If you manage to copy a HD sector into a file, then there is a nice little Hexe:
FileCompare_2.2 (1989) by Bodo Wenzel. Or a nice little Hexer: BinView_0.11 (1.8.97) by Jens Brüggemann.
Falcon, TT & some more
beel1
Posts: 55
Joined: 25 Feb 2019 22:36

Re: Hard drive sector viewer ?

Post by beel1 »

Chkdsk3 from AHDI 6.061?

Return to “SOFTWARE”

Who is online

Users browsing this forum: CCBot and 43 guests