Hello, my name is Guus.
It seems like a long time ago, I worked for Atari.
I've repaired many 2600 units and was there when the 600XL was introduced. And the 800XL, 1010, 1050 and a couple of printers and the plotter.
And I've repaired many of those as well.
Then the ST series was introduced, the office moved from Breda to Utrecht. (Two cities in Netherlands)
And I was sacked.
Still I kept active, for the SAG (Stichting Atari Gebruikers) that once had 7000 members and many magazines per annum.
Now I have build some extensions for the 8-bit, as a team member of course.
So the Freezer 2004 and the MegaSpeedy had my PCB design and assembly.
Also, I own quite a bit of ST's, TT, Falcon and some HD's and SCSI devices.
Currently I'm trying to get a Mega ST to run on 16 Mhz with very few parts.
I found a description in German language and I'm trying that out.
BR/
Guus
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Guus Assmann
-
exxos
- Site Admin

- Posts: 28211
- Joined: 16 Aug 2017 23:19
- Location: UK
Re: Guus Assmann
:welcomewave: Guus.
What did you do at Atari then?
What did you do at Atari then?
-
guus.assmann
- Posts: 96
- Joined: 23 Sep 2017 20:52
- Location: Ede Netherlands
Guus Assmann
Hello Exxos,
Repair the 2600 units.
And later the 600XL and all other computers.
I'm the one that found the "Mexico" CPU's that have a timing issue when they get warm.
Later, when I was involved in SAG, I was one of the "hardware freaks".
Most hardware designs were from me, where other team members wrote the software.
And I've been the chairman of the club for a while as well.
From Atari, I moved to repairing bigger computers.
Data-General Nova and Eclypse.
BR-
Guus
Repair the 2600 units.
And later the 600XL and all other computers.
I'm the one that found the "Mexico" CPU's that have a timing issue when they get warm.
Later, when I was involved in SAG, I was one of the "hardware freaks".
Most hardware designs were from me, where other team members wrote the software.
And I've been the chairman of the club for a while as well.
From Atari, I moved to repairing bigger computers.
Data-General Nova and Eclypse.
BR-
Guus
-
Number_Nine
- Posts: 21
- Joined: 19 Sep 2017 13:48
- Location: UK
Re: Guus Assmann
Was that any less painful than described in The Soul of a New Machine by Tracy Kidder? ;)
-
guus.assmann
- Posts: 96
- Joined: 23 Sep 2017 20:52
- Location: Ede Netherlands
Guus Assmann
Hello Number_Nine,
Sorry for the late reply, I've missed your comment.
I'm not familiar with that writing.
However, there was one very big advantage on these machines.
They could handle core memory.
So I could load a testprogram into a memory card, on a working machine.
And get to the "sick" computer with the test loaded.
We also had all schematic diagrams and the layout.
And one more thing I found very good. These computers needed Airco. And I like that low temperature.
BR/
Guus
Sorry for the late reply, I've missed your comment.
I'm not familiar with that writing.
However, there was one very big advantage on these machines.
They could handle core memory.
So I could load a testprogram into a memory card, on a working machine.
And get to the "sick" computer with the test loaded.
We also had all schematic diagrams and the layout.
And one more thing I found very good. These computers needed Airco. And I like that low temperature.
BR/
Guus
Who is online
Users browsing this forum: CCBot and 39 guests