You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Terriblefire in 2020
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Terriblefire in 2020
Ok a new year is here... two boards are already at the board house. Another is about to be sent off and a fourth will not be far behind it..
1. CD32 Riser Prototype
2. TF536 x 10 Board Experiment
3. TF1260 Revision 1
4. TF360 Revision 2 (updates from Tf1260)
There are things that are going to get in the way of this chiefly of which is a 3 Week flying trip planned in Feb/March to complete my FAA commercial pilots license. Then some flying on the US west coast in the summer...
Also I start a new job on monday with more responsibilities than i've had for the last 3 years.
1. CD32 Riser Prototype
2. TF536 x 10 Board Experiment
3. TF1260 Revision 1
4. TF360 Revision 2 (updates from Tf1260)
There are things that are going to get in the way of this chiefly of which is a 3 Week flying trip planned in Feb/March to complete my FAA commercial pilots license. Then some flying on the US west coast in the summer...
Also I start a new job on monday with more responsibilities than i've had for the last 3 years.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
PhilC
- Moderator

- Posts: 7408
- Joined: 23 Mar 2018 20:22
Re: Terriblefire in 2020
Happy to hear you are still doing the flying stuff as well as the electronics.
Good luck with the new job.
Good luck with the new job.
If it ain't broke, test it to Destruction.
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Terriblefire in 2020
Flying is my #1 hobby. Electronics is #2.
New job is a bit strange.. transitioning from consultant to employee.
New job is a bit strange.. transitioning from consultant to employee.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
8 Bit Dreams
- Moderator Team

- Posts: 785
- Joined: 09 Nov 2018 07:12
- Location: Germany
Re: Terriblefire in 2020
Don't forget about Chinese new year festival - it is also in February, there is no pcb production during this period usually
Retro computer hardware & repair in Germany
-
kim_jorgensen
- Posts: 2
- Joined: 08 Nov 2018 16:18
Re: Terriblefire in 2020
An item is missing on your 2020 list: a genuine terrible fire on stream. We were promised this years ago, but you have still not delivered :(
Keep up the good work!
Keep up the good work!
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Terriblefire in 2020
They happen
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
stephen_usher
- Site sponsor

- Posts: 7346
- Joined: 13 Nov 2017 19:19
- Location: Oxford, UK.
Re: Terriblefire in 2020
That started a week ago and goes on for another two. However, the virus outbreak is more of an issue as most of China is locked down at the moment.8 Bit Dreams wrote: 04 Jan 2020 17:55 Don't forget about Chinese new year festival - it is also in February, there is no pcb production during this period usually
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
-
Maximilian
- Posts: 405
- Joined: 28 Feb 2019 17:02
Re: Terriblefire in 2020
Thank you for the hard work!,
:dualthumbup:
And good luck with the new job!
:dualthumbup:
And good luck with the new job!
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: Terriblefire in 2020
My CPL flight test is a week today. Expect radio silence until after that.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
supaduper
- Site sponsor

- Posts: 663
- Joined: 08 Nov 2018 12:05
Re: Terriblefire in 2020
Wishing you all the best Stephen
Who is online
Users browsing this forum: CCBot and 33 guests