Do I pick a 33MHZ, a 33.333MHz, or a 32.7680MHZ one? Will any work?
7.20mm x 5.20mm 3.3v right?
32.768
https://www.digikey.ca/product-detail/e ... ND/8634119
Or
33
https://www.digikey.ca/product-detail/e ... ND/2155882
or
33.333
https://www.digikey.ca/product-detail/e ... ND/1024762
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
what crystal for 33MHz?
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor

- Posts: 5683
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: what crystal for 33MHz?
Nothing is that picky about exact frequencies. So any will work.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Who is online
Users browsing this forum: CCBot and 3 guests