Hi,
I’m trying to get my head around the different options and status of the development, but weren’t terribly (pun! pun!) successful. I’m looking for an accelerator that should work in an Atari 1040STF (DIL/CPU is socketed already), that gives a decent speed increase, some ALT-RAM and IDE. Which one would be best suited? TF330?
Greetings
arf
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
TF for the Atari ST?
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF for the Atari ST?
The TF534 will be the best option for now.arf wrote: 26 Mar 2019 22:11 Hi,
I’m trying to get my head around the different options and status of the development, but weren’t terribly (pun! pun!) successful. I’m looking for an accelerator that should work in an Atari 1040STF (DIL/CPU is socketed already), that gives a decent speed increase, some ALT-RAM and IDE. Which one would be best suited? TF330?
Greetings
arf
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
Cyprian
- Posts: 535
- Joined: 22 Dec 2017 09:16
- Location: Warszawa, Poland
Re: TF for the Atari ST?
I'm also interested in TF for STe
ATW800/2 / V4sa / Lynx I / Mega ST 1 / 7800 / Portfolio / Lynx II / Jaguar / TT030 / Mega STe / 800 XL / 1040 STe / Falcon030 / 65 XE / 520 STm / SM124 / SC1435
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
DDD HDD / AT Speed C16 / TF536 / SDrive / PAK68/3 / Lynx Multi Card / LDW Super 2000 / XCA12 / SkunkBoard / CosmosEx / SatanDisk / UltraSatan / USB Floppy Drive Emulator / Eiffel / SIO2PC / Crazy Dots / PAM Net
http://260ste.atari.org
-
arkadiusz.makarenko
- Moderator Team
- Posts: 1368
- Joined: 19 Jun 2019 07:36
- Location: Edinburgh
Re: TF for the Atari ST?
Is IDE working on Atari ST or is it 030+RAM "only" for TF534?
Do not trust people. They are capable of greatness.
~ Stanislaw Lem
~ Stanislaw Lem
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF for the Atari ST?
IDE was working for EmuTOS but not sure about standard TOS.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
btl
- Posts: 43
- Joined: 15 Jul 2019 22:19
Re: TF for the Atari ST?
Hi all,
Sorry for digging up this one, I just finished building my H4 STFM remake board and i am looking
for an accellerator and fastram upgrade. Is the TF534 still the best option, or is something better
coming up in 2020?
Greets,
btl
Sorry for digging up this one, I just finished building my H4 STFM remake board and i am looking
for an accellerator and fastram upgrade. Is the TF534 still the best option, or is something better
coming up in 2020?
Greets,
btl
-
terriblefire
- Admin sponsor
- Posts: 5685
- Joined: 28 Aug 2017 22:56
- Location: Glasgow, UK
Re: TF for the Atari ST?
If the TF536 pans out it'll be the best option. But i suspect that feedback is at least 6 weeks away.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
btl
- Posts: 43
- Joined: 15 Jul 2019 22:19
Re: TF for the Atari ST?
ah great. I'll follow the development, then. Thanks for the quick reply!
Who is online
Users browsing this forum: CCBot and 8 guests