I am in the USA.
Thanks!
WANTED: Top Mobo Shield for 1040STF
-
rubber_jonnie
- Site Admin
- Posts: 14894
- Joined: 17 Aug 2017 19:40
- Location: Essex
Re: WANTED: Top Mobo Shield for 1040STF
I've mentioned on your other thread, but the shield isn't really necessary unless you want the machine to be "historically correct".
My STEs and at least half of my STs run without one quite happily. The other half I just happened to reassemble that way and I'm sure they'd be fine either way.
My STEs and at least half of my STs run without one quite happily. The other half I just happened to reassemble that way and I'm sure they'd be fine either way.
Collector of many retro things!
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
800XL and 65XE both with Ultimate1MB,VBXL/XE & PokeyMax, SIDE3, SDrive Max, 2x 1010 cassette, 2x 1050 one with Happy mod, 3x 2600 Jr, 7800 and Lynx II
Approx 20 STs, including a 520 STM, 520 STFMs, 3x Mega ST, MSTE & 2x 32 Mhz boosted STEs
Plus the rest, totalling around 50 machines including a QL, 3x BBC Model B, Electron, Spectrums, ZX81 etc...
-
PaulJ
- Posts: 1568
- Joined: 08 Apr 2018 01:14
- Location: USA
Re: WANTED: Top Mobo Shield for 1040STF
Top shield?? Who even puts the top of the case on. Much easier to reconfigure when the boards available. I did almost burn down Britain this way but there's a risk no matter what ya do. Did it feel a little warn in Britain yesterday?
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: ClaudeBot and 4 guests