- 2BF088DE-6CD1-4F39-8046-6ABDD0841D36.jpeg (406.71 KiB) Viewed 6693 times
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
Please make sure you are logged in for at least 2 hours
to make sure your IP is added into the firewall whitelist, thanks
to make sure your IP is added into the firewall whitelist, thanks
TF330 rev2 is here
Moderators: terriblefire, Terriblefire Moderator
-
terriblefire
- Admin sponsor
- Posts: 5675
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
TF330 rev2 is here
Ok these guys finally showed up
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
-
terriblefire
- Admin sponsor
- Posts: 5675
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 rev2 is here
And it looks like the dude that made them may have been sober this time.
- tf330r2.JPG (191.63 KiB) Viewed 6696 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 rev2 is here
JLCPCB this time as well? It was JLCPCB last time, right?
A kludge is a workaround or quick-and-dirty solution that is clumsy, inelegant, inefficient, difficult to extend and hard to maintain.
My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
My lack of focus:
[ 8 * A500 ][ 2 * A500+ ][ 2 * A600 ][ 2 * A1200 ][ 2 * A2000 w/ A2386 ][ A4000 w/ TF4060, CyberVision 64 3D, FastLane SCSI Z3 ][ CD32 ][ VIC-20 ][ 4 * C64 Breadbin ][ 5 * C64C ][ 2 * C128 ][ C128D ][ C64 DTV ][ 3 * Mac Classics of different types ]
-
terriblefire
- Admin sponsor
- Posts: 5675
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 rev2 is here
Yeah I tend to stick with one manufacturer per board
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 rev2 is here
Looks pretty awesome S.
Excelent work buddy.
Excelent work buddy.
Re: TF330 rev2 is here
I'm gonna try ordering the Alliance ram for the rev2. If it works it would be a massive cost saving.
Also XC95144XLs are out of stock at Digikey atm...
Also XC95144XLs are out of stock at Digikey atm...
Re: TF330 rev2 is here
Hi Alen .i have thoroughly tested the Alliance and they work perfect bud so buy with confidencealenppc wrote: Tue Jan 15, 2019 2:54 pm I'm gonna try ordering the Alliance ram for the rev2. If it works it would be a massive cost saving.
Also XC95144XLs are out of stock at Digikey atm...
https://www.digikey.co.uk/product-detai ... ND/6099740
And some XC95144XLs here at Digikey which I have bought and used
https://www.digikey.co.uk/product-detai ... -ND/826978
Re: TF330 rev2 is here
Oh that's great news. Thanks, cheep ram. 
-
terriblefire
- Admin sponsor
- Posts: 5675
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF330 rev2 is here
I am out of 0603 caps... RS order places
- 698C928F-270A-4A71-A5B9-7EB3EC1B5CDD.jpeg (891.75 KiB) Viewed 6558 times
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF330 rev2 is here
Hi terriblefire.
Can you answer the question?
1. What 68030 processors will work?
2. Will Motorola MC68030RC50B 68030 50MHz work? What else?
3. The processor in the final version will stand on the panel?
4. What type of processor case is planned in the release version?
5. Will there be extra power on the board? I and a few people would like to see the opportunity to connect a cd-rom from a laptop.
The work of staff сd-rum is not satisfactory.
5. Do you need processors?
I have the following processors:
MC68EC020FG16
MC68EC020FG25
MC68EC030FE25B
MC68EC030FE25C
MC68EC040FE25A
MC68EC060ZU75
MC68LC040RC33
MC68LC060FE50
Thanks for your work.
2 alenppc - Hi bro))
Can you answer the question?
1. What 68030 processors will work?
2. Will Motorola MC68030RC50B 68030 50MHz work? What else?
3. The processor in the final version will stand on the panel?
4. What type of processor case is planned in the release version?
5. Will there be extra power on the board? I and a few people would like to see the opportunity to connect a cd-rom from a laptop.
The work of staff сd-rum is not satisfactory.
5. Do you need processors?
I have the following processors:
MC68EC020FG16
MC68EC020FG25
MC68EC030FE25B
MC68EC030FE25C
MC68EC040FE25A
MC68EC060ZU75
MC68LC040RC33
MC68LC060FE50
Thanks for your work.
2 alenppc - Hi bro))