I have VOFA ET4000 Adapter for 260/520 and 1040ST ...
You will not be able to post if you are still using Microsoft email addresses such as Hotmail etc
See here for more information viewtopic.php?f=20&t=7296
See here for more information viewtopic.php?f=20&t=7296
BOOKMARK THIS PAGE !
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
https://www.exxosforum.co.uk:8085/IP_CHECK/
You can unban yourself if needed. It also sends me reports to investigate the ban.
DO NOT USE MOBILE / CGNAT DEVICES WHERE THE IP CHANGES CONSTANTLY!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
At this time, it is unfortunately not possible to whitelist users when your IP changes constantly.
You may inadvertently get banned because a previous attack may have used the IP you are now on.
So I suggest people only use fixed IP address devices until I can think of a solution for this problem!
VOFA ET4000 Adapter for 260/520 and 1040ST ...
-
frank.lukas
- Posts: 811
- Joined: 19 Jan 2018 11:52
VOFA ET4000 Adapter for 260/520 and 1040ST ...
You do not have the required permissions to view the files attached to this post.
-
frank.lukas
- Posts: 811
- Joined: 19 Jan 2018 11:52
Re: VOFA ET4000 Adapter for 260/520 and 1040ST ...
I have the Adapter ready build up and tested or for 40,- Euro plus 6,20 Euro postage worldwide as part set with PCB Set, the programed GALs and a new ISA Slot.
As driver it work the Nova Driver for the VOFA Adapter or NVDI ET4000 / NVDI5. With a ET4000 1MB ISA 1024x768/256 Color is possible. The speed with GEMBENCH is 120% from a ST-High System.
As driver it work the Nova Driver for the VOFA Adapter or NVDI ET4000 / NVDI5. With a ET4000 1MB ISA 1024x768/256 Color is possible. The speed with GEMBENCH is 120% from a ST-High System.
-
DoG
- Posts: 1292
- Joined: 07 Apr 2018 12:26
Re: VOFA ET4000 Adapter for 260/520 and 1040ST ...
Interested but just a quick question. I got your IDE card in one of my STfm. Can I stack them and get it to work? I realize that the keyboard probably won't fit after that but already have plans to move it outside the case anyway.
-
frank.lukas
- Posts: 811
- Joined: 19 Jan 2018 11:52
Re: VOFA ET4000 Adapter for 260/520 and 1040ST ...
Yes you can.
I have in the CPU socket a IDE Interface than a 030 CPU speedercard, than a Fastram card and on top a graphicadapter
I have in the CPU socket a IDE Interface than a 030 CPU speedercard, than a Fastram card and on top a graphicadapter
-
DoG
- Posts: 1292
- Joined: 07 Apr 2018 12:26
Re: VOFA ET4000 Adapter for 260/520 and 1040ST ...
Sounds great. You got PM.
-
JoeFloyd
- Posts: 28
- Joined: 08 May 2020 23:08
Re: VOFA ET4000 Adapter for 260/520 and 1040ST ...
Hi Frank,
@frank.lukas, Are you still selling the Atari 520/2040 ST version of the VOFA ET4000 adapter?
I would be interested in ordering 2 adapters if they are still available.
Thanks,
Joe
@frank.lukas, Are you still selling the Atari 520/2040 ST version of the VOFA ET4000 adapter?
I would be interested in ordering 2 adapters if they are still available.
Thanks,
Joe
-
frank.lukas
- Posts: 811
- Joined: 19 Jan 2018 11:52
Re: VOFA ET4000 Adapter for 260/520 and 1040ST ...
I have last one left. I send you a PM ...
Who is online
Users browsing this forum: CCBot and 24 guests