JezC H5 C5B Build - one STep beyond...?

[exxos]

@JezC

PM sent

Be good to finally get to the bottom of the issue I've got a load of new 1772 chips I can try on it as well

[JezC]

@JezC

PM sent

Be good to finally get to the bottom of the issue I've got a load of new 1772 chips I can try on it as well

Received your PM, will post it at lunch time.

I'd suggest that you try it with your Sony drive first and see if it boots to the desktop with a floppy in the drive.
I'm expecting it will still crash on accessing the floppy though.

All components have been working in my H4 board and failing in the H5C boards (different number of bombs on different boards but all at the same accessing the floppy during boot).

[exxos]

I'd suggest that you try it with your Sony drive first and see if it boots to the desktop with a floppy in the drive.
I'm expecting it will still crash on accessing the floppy though.

Yeah I'll do that first.

All components have been working in my H4 board and failing in the H5C boards (different number of bombs on different boards but all at the same accessing the floppy during boot).

Cool. I'll probably start a new topic on it all as I go along. I'm pretty sure it can only be the problem I think it is.. But could be anything or a combination of things etc. I'll figure it out I'm sure

[JezC]

Sounds good @exxos

I'm hoping that once you have some success I'll be able to follow some similar steps on the other H5C1 & H5CB that I still have here...so feel free to be as detailed in the description as you can!

[exxos]

I'm hoping that once you have some success I'll be able to follow some similar steps on the other H5C1 & H5CB that I still have here...so feel free to be as detailed in the description as you can!

Yeah be a bodge board to fix if it is what I think. We been lacking in bodge wires lately.. So think it's about time..

[JezC]

I'm hoping that once you have some success I'll be able to follow some similar steps on the other H5C1 & H5CB that I still have here...so feel free to be as detailed in the description as you can!

Yeah be a bodge board to fix if it is what I think. We been lacking in bodge wires lately.. So think it's about time..

That might be fun with th SMT buffers etc. on the H5C boards...reminds me taht I still need to fit the buffer onto my H4 (but I'll wait until I have at leat on e other H5 boards working before I risk brekaing the H4 )

[exxos]

That might be fun with th SMT buffers etc. on the H5C boards...

Yep. Be some track cutting and a small board to replace the inverter chip.. I'll try to make it as simple as possible...

[exxos]

@JezC H5 just arrived

On first power up I can confirm what @JezC was seeing..

IMG_3464.JPG (134.94 KiB) Viewed 1617 times

My first observation... (spot the mistake)

IMG_3465.JPG (257.86 KiB) Viewed 1617 times

Then after...

IMG_3466.JPG (209.13 KiB) Viewed 1617 times

It just run though GB6 and loaded HDdriver from floppy.

IMG_3467.JPG (95.9 KiB) Viewed 1617 times

[PhilC]

Blitter jumper missing?

[exxos]

Blitter jumper missing?