Can all registered uses please login, even just for a few minutes..
It helps build a picture where our "good traffic" is coming from..
Thanks :)
It helps build a picture where our "good traffic" is coming from..
Thanks :)
TF4060 Revision 1 Design Complete
Moderators: terriblefire, Terriblefire Moderator
Re: TF4060 Revision 1 Design Complete
Oh I completely understand. There's a few projects I've put off because I wasn't going to pay for the CPLDs.
Re: TF4060 Revision 1 Design Complete
So the box I think I'll put one of these in is a 3000. It's got the onboard mem maxed to 16mb plus 2mb of chip. But I also have a zz9000 video/network/ram/exc. card. That ram comes in at $1000_0000. There shouldn't be any memory conflicts should there?
-
terriblefire
- Admin sponsor

- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF4060 Revision 1 Design Complete
I've been busy lately with work and the TF4060.
I've completed the designs for the rev2 of this board and expect to demo it at Amiga 37. Dont have time to stream and its getting too expensive to power up the basement for long periods. TBH unless electricity prices come down i think I'll be reading books instead of doing retro stuff.
I've completed the designs for the rev2 of this board and expect to demo it at Amiga 37. Dont have time to stream and its getting too expensive to power up the basement for long periods. TBH unless electricity prices come down i think I'll be reading books instead of doing retro stuff.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF4060 Revision 1 Design Complete
Oh that is good news. I should be picking up a plain Jane 4000 on Saturday, so I have now a keaner interest in the TF4060.
It boots and I am told is stable, but battery funk to clean and caps to replace.
Being a 4000 noob, is there any point/benefit of having Fastram on the 4000 motherboard, due to the TF having shed loads of RAM?
Cheers
It boots and I am told is stable, but battery funk to clean and caps to replace.
Being a 4000 noob, is there any point/benefit of having Fastram on the 4000 motherboard, due to the TF having shed loads of RAM?
Cheers
Re: TF4060 Revision 1 Design Complete
Thank you. Looking forward to buying one or two.

A man of your talents I would have thought you'd have built your own PV solar array and battery bank out of old calculators and some car batteries and be ready to go "off grid"terriblefire wrote: Thu Sep 15, 2022 9:22 am TBH unless electricity prices come down i think I'll be reading books instead of doing retro stuff.
Senior Principal ASIC Engineer - SystemVerilog, VHDL
Thalion Webshrine - http://thalion.atari.org
ST,STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
Thalion Webshrine - http://thalion.atari.org
ST,STf,STfm,STe,MegaST,MegaSTe,Falcon060
A500+,A600,A4000/060,CD32,CDTV
- mrbombermillzy
- Moderator

- Posts: 2347
- Joined: Sun Jun 03, 2018 7:37 pm
Re: TF4060 Revision 1 Design Complete
I was actually half seriously thinking of advertising 'free electricity' as one of the features at the computer show to get extra attendance figures!terriblefire wrote: Thu Sep 15, 2022 9:22 am TBH unless electricity prices come down i think I'll be reading books instead of doing retro stuff.
-
terriblefire
- Admin sponsor

- Posts: 5687
- Joined: Mon Aug 28, 2017 10:56 pm
- Location: Glasgow, UK
Re: TF4060 Revision 1 Design Complete
Multiple issues here. One of which is the building is about 70-80ft high. So getting on the roof to install anything is scary stuff.alexh wrote: Fri Sep 16, 2022 10:40 am A man of your talents I would have thought you'd have built your own PV solar array and battery bank out of old calculators and some car batteries and be ready to go "off grid"![]()
Also just buying solar is impossible right now. And we don't get much sunlight here in Glasgow.
———
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
"It is not necessarily a supply voltage at no load, but the amount of current it can provide when touched that
indicates how much hurting you shall receive."
Re: TF4060 Revision 1 Design Complete
"I'll be displaying my retro crypto mining rig..."mrbombermillzy wrote: Fri Sep 16, 2022 2:34 pm I was actually half seriously thinking of advertising 'free electricity' as one of the features at the computer show to get extra attendance figures!![]()
- mrbombermillzy
- Moderator

- Posts: 2347
- Joined: Sun Jun 03, 2018 7:37 pm
Re: TF4060 Revision 1 Design Complete
derkom wrote: Sun Sep 18, 2022 6:32 am"I'll be displaying my retro crypto mining rig..."mrbombermillzy wrote: Fri Sep 16, 2022 2:34 pm I was actually half seriously thinking of advertising 'free electricity' as one of the features at the computer show to get extra attendance figures!![]()
What does a 'retro' crypto rig comprise then? A Pentium 2 with a Voodoo 6000 card?
Do you remember those beasts?
- stephen_usher
- Site sponsor

- Posts: 7464
- Joined: Mon Nov 13, 2017 7:19 pm
- Location: Oxford, UK.
- Contact:
Re: TF4060 Revision 1 Design Complete
ZX81 with a wobbly RAM pack probably.
Intro retro computers since before they were retro...
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.
ZX81->Spectrum->Memotech MTX->Sinclair QL->520STM->BBC Micro->TT030->PCs & Sun Workstations.
Added code to the MiNT kernel (still there the last time I checked) + put together MiNTOS.
Collection now with added Macs, Amigas, Suns and Acorns.