NEW BOM

[LADmachining]

Quick question - I've knocked one of the caps (C16) off of the bottom of my TF536 and I checked the BOM at
On line 32 it says this is a 22uF part, but both the Mouser and Digi-Key part numbers lead to 0.22uF parts, whereas the RS part number leads to a 22uF part. Am I correct in assuming that 22uF is indeed the correct value?

Thanks!

I have updated the BoM. The part description and RS stock codes are correct, the Mouser and Digi-Key part numbers linked to the wrong value caps. 1u and 22u are the correct values.

Anthony

[DominoTree]

Quick question - I've knocked one of the caps (C16) off of the bottom of my TF536 and I checked the BOM at

On line 32 it says this is a 22uF part, but both the Mouser and Digi-Key part numbers lead to 0.22uF parts, whereas the RS part number leads to a 22uF part. Am I correct in assuming that 22uF is indeed the correct value?

Thanks!

I have updated the BoM. The part description and RS stock codes are correct, the Mouser and Digi-Key part numbers linked to the wrong value caps. 1u and 22u are the correct values.

Anthony

Awesome! Was kinda hoping it was 0.22uF because I have a bunch here :P Thanks for the update!

[exxos]

Only winbond W9825G6KH-5 200MHz don't want to work with TF536 card

As anyone else tried these chips and found they do not work ?