The TF330 is here

[alenppc]

That`s a good price Alen for the DB23 pin but unfortunately they only ship within Canada

Do they? Ok, in case of shortage I can help distribute these. There will be a bit of overhead due to shipping+customs but it should be able to beat the ebay scalpers.

[terriblefire]

Build photos

05C96F80-704F-4E8B-BFC2-378AEEC2DE7D.jpeg (7.8 MiB) Viewed 5568 times

0181CC4A-5AE8-463D-AE54-84F8520B4047.jpeg (3.26 MiB) Viewed 5568 times

[terriblefire]

Quick note to remember to put the resistor networks on before the 030 socket.

[8 Bit Dreams]

it's here!!!
And? How it goes? Is it working ?
Oh..i see, there is no oscillator on it yet..

[terriblefire]

There are a lot of things I need to check. The ram and the 100Mhz crystal is last on the list to add. Will be a week before I get this up and running. First thing I need to do is check I can disable the onboard cpu properly

[8 Bit Dreams]

Some old (A2k) accelerator cards have "Boss" jumper on them, shorting it onboard CPU gets disabled, don't know how it is routed though..

[terriblefire]

The solution I need is either to hold HALT low forever or BG low forever. I don’t know which will work on the CD32 because it depends what else is wired to those lines.

I have a plan. I just need to run through it

[terriblefire]

Just booted the 030 at 14mhz. No ram or IDE yet.

Good news is no patches are needed for my 020 turn off mode. Yay.

F065C043-5D0E-4398-9F2F-55A363C5C1E6.jpeg (2.81 MiB) Viewed 5496 times

[supaduper]

Oh my giddy aunt it lives! great work mate

[terriblefire]

IDE up and running too